485E low-impact elliptical exerciser. The 485E is an incredibly smooth exerciser that moves your feet in a natural elliptical path, minimizing the impact on your knees and ankles. And the unique 485E features adjustable resistance, upper-body and stationary handlebars, and a multi-mode exercise monitor to help you get the most from your exercise. Welcome to a whole new world of natural, elliptical-motion exercise from PROFORM. For your benefit, read this manual carefully before you use the PROFO

Table of contents 1 Important 3 1.1 Power requirements 3 1.2 Safety Information 3 1.3 Conformity 4 1.4 Using GAP standard compliance 4 1.5 Recycling and disposal 4 1.6 Electric, Magnetic and Electromagnetic Fields (“EMF”) 5 2 Your phone 6 2.1 What’s in the box 6 2.2 Overview of your phone 7 2.3 Display icons 9 2.4 Overview of the base station 10 3 Getting started 11 3.1 Connect the base station 11 3.2 Install your phone 11 3.3 Welcome mode 12 3.4 Menu structure 14 4 Using your phone 17 4.1 Make

2. Tilt the treadmill back until it rolls freely on the front wheels. Carefully move the treadmill to the desired location. Never move the treadmill without tipping it back. To reduce the risk of injury, use extreme caution while moving the treadmill. Do not attempt to move the treadmill over an uneven surface. 3. Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position. HOW TO LOWER THE TREADMILL FOR USE 1. Refer to drawing 2 above. Hold the uppe

Attach the Console (6) to the Upright with four #8 x 3/4O Round Head Screws (16). Be careful to avoid pinching the console wire. Press the Resistance Knob (50) onto the Resistance Control (26). 2 1 Console Wire Console Wire Console Wire 3 1 25 26 29 3 50 26 6 16 26 Console Wire 25 1a 6 3. Attach a Pedal (31) to one of the Pedal Arms (12) with three #8 x 3/4O Round Head Screws (16) as shown. Repeat this step to attach a Pedal to the other Pedal Arm (not shown). 4. Make sure that there are Pedal A

Remove time. the filter from the filter housing and clean or replace the filter (see page 15). Air Temperature Heating Time 70°F + 6 to 8 hours b. The pump may have a foreign object stuck in 50°F to 70°F 9 to 11 hours the impeller. Contact our customer service 30°F to 50°F 12 to 14 hours department. If the water still has not heated after four days, c. The pump may have a loose wire connection. contact our customer service department. Contact our customer service department. 7. SYMPTOM: THE WATE

The treadmill will then automatically adjust to the speed and incline settings for the second segment. The arrow will then move one segment to the right. The workout will continue in this way until the arrow reaches the right end of the profile. The walking belt will then slow to a stop. If the speed or incline setting for the current segment is too high or too low, you can override the setting by pressing the Speed or Incline buttons; however, when the next segment begins, the treadmill will au

The display will change from one number to the other every few seconds, as shown by the indicators beside the display. The display will also show your heart rate when you use the thumb pulse sensor (see step 6 on page 12) or the optional chest pulse sensor (see page 21). 11 Time/Incline/Segment Time display—When the manual mode or the iFIT.com mode is selected, this display will show the elapsed time and the incline level of the treadmill. The display will change from one number to the other eve

VIDEO AUDIO OUT IN Adapter Audio Cable VIDEO AUDIO OUT IN Adapter Audio Cable Audio Cable Note: If your VCR is connected to a home stereo, you may connect the audio cable to the home stereo as described in step B at the left. Remember, you must be able to listen to the audio through speakers or headphones in order to use i-Fit.com CDOs or videos. When the audio cable is properly connected, make sure that the on/off switch near the treadmill power cord is in the on position. Next, make sure that

TO AVOID UNNECESSARY DELAYS, PLEASE CALL DIRECT TO OUR TOLL-FREE CUSTOMER HOT LINE. The trained technicians on our customer hot line will provide immediate assistance, free of charge to you. CUSTOMER HOT LINE: 1-800-999-3756 Mon.–Fri., 6 a.m.–6 p.m. MST Model No. PFBE64080 Serial No. Write the serial number in the space above for reference. CAUTION Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal (under s

CALL TOLL-FREE: 1o888-533-1333 Mon.=Fri., 6 a.rn.=6 p.m. MST ON THE WEB: : Visit our website at Read all precautions and instructions in this rnanual before using this equipment. Keep this manual for future reference. new products, prizes, fitness tips, and much more r. TABLE OF CONTENTS iMPORTANT PRECAUTIONS ................................................................ 3 BEFORE YOU BEGIN ...................................................................... 4 ASSEMBLY .......................