14 How to Deal with Noise .................................................................................................. 15 FTMW (FTM – Work Bench)......................................................................................... 16 List of Compatible Connectors ...................................................................................... 16 Request to Our Customers.............................................................................................. 17 Please Try Con

Flange H / Flange D Metal Fittings Flange H [Characteristics] Metal fittings for MPC-SET (EX) and MPC_816XC. The H type is for a back-face installation, and the D type is for a bottom-face installation. Flange D [Construction] Metal fitting *1, Machine screws *2. -13 MPC Peripherals ~ Common for MPC-68K and MPC-816 ~ Cable DOS/V 98 [Characteristics] This is a cable of our company brand to connect MPC and a personal computer. Although the basic cable is for DOS/V, because a 25-pin conversion conn

tRANSPORt AND StORAGE Please follow these instructions when carrying and moving the equipment, because lifting it incorrectly may strain your back or risk other accidents: Standing in front of the device, tilt the device slowly towards you, and push from the front and push along the floor on the wheels at the front support. We recommend that you use a protective base when transporting the equipment. To prevent the equipment malfunctioning, store in a dry place with as little temperature variatio

LNK-048 is equipped with 24- point input and 24-point output, and can monitor the status of a sensor distant from the host or control the actuator. Also, if used as an IO etc. for a control BOX of an apparatus, because the host and LNK- 048 can be connected via a twisted pair, it will also become a wiring-saving system. Also, it can be used as a remote IO of a personal computer equipped with MPCLNK or PCLNK (PCM- 95W03, with a case). [Specification] Communication: RS-485/SDLC standard 750 kpps.

8 -14 p. 15 -21 H A N D L E I D I N G p. 22 -28 M A N UA L E D ' U S O p. 29 -35 M A N UA L D E L U S UA R I O p. 36 -42 B R U K S A N V I S N I N G S . 43 -48 K AY T TO O H J E S . 49 -54 SERIAL NUMBER SERIENNUMMER NUMERO DE SERIE SERIENUMMER NUMERO DI SERIE NUMERO DE SERIE SERIENNUMMER SARJANUMERO Cardio Control 2007_PUBLISHED v01 1 13.7.2007 10:37:54 OWNER ' S MANUAL • CARDIO CONTROL CONtENtS ASSEMBLY............................................................3, 56 ADJUSTMENTS................

Check the suitability of the distance by pedalling anti-clockwise. 4. Release the knob when the distance is correct; the seat will click into position. 5. Tighten the locking knob by turning it clockwise. You can select the inclination of the backrest to uit your own preferences as follows: 1. Go behind the equipment. 2. Pull the backrest inclination adjustment knob outwards so that the backrest can be moved freely. 3. Select the desired inclination. 4. Release the knob when the inclination is c

* [] Current values indicate externally-supplied DC 24V current, and the minimum current values with all I/Os OFF. (1) (2) (3) (1) (2) MOP-048 ACCEL CORP CEP-013B (1) (2) -6- IOP-048 24-Point Photocoupler Input Board / 24-Point Transistor Output Board [Characteristics] This is a dedicated input/output board equipped with 24-points for each input and output. Each input/output is equipped with an LED monitor. The input and output interfaces have equivalent specifications with MOP and MIP, respecti