To Use Digital Timer Slide Switch To “Timer” To Set the Current Time While time appears in the LCD. . Push “Set Time” button once. The time display will be flashing. (If the display stops flashing before you finish, just push “Set Time” again to continue.) . Push the “Day” button until the current day appears on top. . Push the “Hour” button until the current hour appears. Be sure to cycle through the hours until AM or PM appears to the right of the time. . Push the “Min” button until the curren

Save these instructions as this manual contains important safety and operating information. When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS APPLIANCE WARNING: To reduce the risk of fire, electric shock or injury: 1. Always turn Control Dial to the OFF position before unplugging SweepEZE™. 2. Always unplug the appliance before cleaning or servicing it. Do not unplug by pulling the cord; to

Read all instructions. 2. Do not touch hot surfaces. Use handles. Use oven mitts or potholders. 3. To protect against electric shock do not immerse cord, plugs, or appliance in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6. Do not operate any appliance with a damaged cord or plug or after th

These fixtures meet all UL specifications. 1. Turn off power at circuit box to avoid possible electric shock. 2. Secure mounting bar (A) to outlet box (B) with outlet box screws (C) (not included) (see fig. 1). 3. Thread hex nut 1 (D1) onto mounting nipple (E) approximately 1/4 inch and insert lock washer (F), then thread mounting nipple (E) onto mounting bar (A) and secure with hex nut 1 (D1). 4. Thread nipple 1 (G1) onto coupling 1 (H1). 5. Secure fixture loop (J) to fixture cover (I). NOTE: D

Read all instructions. 2. Use iron only for its intended 3. To protect against a risk of electric in water or other liquids. 4. The iron should always be turned to unplugging from outlet. Never yank cord outlet; instead, grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let before putting away. Loop cord loosely around 6. Always disconnect iron from electrical outlet when or emptying and when not in use. 7. Do not operate iron with a damaged cord or if the iron has d

Read all instructions. 2. Use iron only for its intended use. 3. To protect against a risk of electric shock, other liquids. 4. The Iron should always be turned to “min” position from outlet. Never yank cord to disconnect from pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. 6. Always disconnect iron from electrical outlet when filling with water and when not in use. 7. Do not operate iron wi

Do not use or attempt to repair the malfunctioning appliance. 5. IF this appliance falls or accidentally becomes immersed in water, unplug it immediately. Do not reach into the water! Do not use this appliance after it has fallen into or becomes immersed in water. 6. To reduce the risk of injury to persons or property, never use this appliance in an unstable position. 7. Do not use this appliance for other than its intended use. 3 POLARIZED PLUG POLARIZED PLUG SHORT CORD INSTRUCTIONS A short pow

SPEAK TOWARDS THE CONSOLE RELEASE THE ALL CALL BUTTON WHEN YOU ARE FINISHED TALKING NOTE: ANY CONSOLE WITH ITS MUTE SWITCH ON AND ANY DOORBELL UNITS THAT HAVE NOT BEEN USED IN THE PRIOR 60 SECONDS WILL NOT RECEIVE THE ALL-CALL MESSAGE EXAMPLE: KITCHEN IS CALLING EVERYONE ALL STATION INDICATORS LIGHT KITCHEN CALLS ALL STATIONS KITCHEN CONSOLE 2 WAIT FOR RESPONSE ALL CONSOLES THAT RECEIVED THE ALL-CALL MESSAGE WILL SOUND THE MESSAGE THE CALLER THEN WAITS FOR A PERSON TO RESPOND NOTE: THE CONSOLES

. .. . .. i iif ff i iit tt’ ’’ s ss W WWe ees sst tti iin nng ggh hho oou uus sse ee IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Use iron only for its intended use. 3. To protect against a risk of electric shock, do not immerse the iron in wateror other liquids. 4. The iron should always be turned to the “MIN” setting before plugging orunplugging from outlet. Never yank cord to d

. . . . . . . . . . . . . . . . . 6 INTRODUCTION Congratulations on the purchase of your new Wireless Intercom System! Please read these instructions carefully before installing your system and follow all of the directions to ensure proper installation. This instruction manual explains in simple steps how to install, use and care for your new Wireless Intercom System in homes, offices or businesses. WIRELESS INTERCOM SYSTEM FEATURES . Allows a choice of 2, 3 or 4 channels to talk to or monitor a