Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
VIDEO AUDIO OUT IN Adapter Audio Cable VIDEO AUDIO OUT IN Adapter Audio Cable Audio Cable Note: If your VCR is connected to a home stereo, you may connect the audio cable to the home stereo as described in step B at the left. Remember, you must be able to listen to the audio through speakers or headphones in order to use i-Fit.com CDOs or videos. When the audio cable is properly connected, make sure that the on/off switch near the treadmill power cord is in the on position. Next, make sure that the power cord is properly plugged in. Follow the steps below to use an i-Fit.com CD or video. Note: Depending on the model of your stereo or computer, the jacks may be labeled differently. You may need to connect the audio cable to a SPEAKER jack or a HEADPHONE jack. To do this, you must purchase a Y-adapter at your local electronics store. CAUTION: You must be able to listen to the audio through speakers or headphones in order to use i-Fit.com CDOs or videos. 1 Insert the key fully into the console. When the key is inserted, the four displays and various indicators on the console will light. 12 2 3 4 Press the PROGRAM button. When the key is inserted, the manual mode will automatically be selected. To use an i-Fit.com CD or video, press the PROGRAM button. The i-Fit.com indicator will light. Insert the i-Fit.com CD or video. If you are using an i-Fit.com CD, insert the CD into your CD player. If you are using an i-Fit.com video, insert the video into your VCR. Press the PLAY button on your CD player or VCR. A moment after the button is pressed, your personal trainer will begin guiding you through your workout. Simply follow your personal trainerOs instructions. During the CD or video program, an electronic OchirpingO sound will alert you when the speed and/or incline of the treadmill is about to change. CAUTION: Always listen for the OchirpO and be prepared for speed and/or incline changes. In some instances, the speed and/or incline may change before the personal trainer describes the change. If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the SPEED or INCLINE buttons on the console. However, when the next OchirpO is heard, the speed and/or incline will change to the next settings of the CD or video program. To stop the program at any time, press the START/STOP button on the console. The TIME/MIN-MILE display will begin to flash. To restart the program, press the START/STOP button again. After a moment, the walking belt will begin to move at 1 mph. When the next OchirpO is heard, the speed and incline will change to the next settings of the CD or video program. The program can also be stopped by pressing the STOP button on your CD player or VCR. When the CD or video program is completed, the walking belt will stop and the TIME/MIN-MILE display will begin to flash. Note: To use another CD or video program, press the START/STOP button or remove the key and go to step 1 on page 12. Note: If the speed or incline of your treadmill does not change when a OchirpO is heard, make sure that the i-Fit.com indicator is lit and the TIME/MIN-MILE display is not flashing. Next, adjust the volume of your CD player or VCR. If the volume is too high or too low, the console may not detect the signals from your CD player or VCR. In addition, make sure that the audio cable is properly connected. 5 Follow your progress with the LED track and the four displays. See step 5 on page 10. 7 6 Measure your pulse, if desired. See step 6 on page 11. When the i-Fit.com CD or video is finished, remove the key. Step onto the foot rails and remove the key from the console. Keep the key in a secure place. Note: If the displays and various indicators on the console remain lit after the key is removed, the console is in the OdemoO mode. Refer to page 14 and turn off the demo mode. CAUTION: Always remove i-Fit.com CDOs and videos from your CD player or VCR when you are finished using them. When you are finished using the treadmill, move the on/off switch near the power cord to the off position. HOW TO USE OTHER I-FIT.COM TECHNOLOGY By adding the optional upgrade module to the console, you can add virtually endless options to your treadmill. To purchase the upgrade module, visit your local department store or sporting goods store or go to Instructions for using other i-Fit.com options will be included with the upgrade module. In addition, make sure to explore to learn more about how you can get the most from i-Fit.com technology! 13 THE INFORMATION MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. To select the information mode, hold down the START/STOP button while inserting the key into the console. When the in...