Войти:
Оценок - 4, средний балл: 4.8 ( )

Инструкция по эксплуатации Accell, модель MPC-68K Series

Производитель: Accell
Размер: 1.01 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


LNK-048 is equipped with 24- point input and 24-point output, and can monitor the status of a sensor distant from the host or control the actuator. Also, if used as an IO etc. for a control BOX of an apparatus, because the host and LNK- 048 can be connected via a twisted pair, it will also become a wiring-saving system. Also, it can be used as a remote IO of a personal computer equipped with MPCLNK or PCLNK (PCM- 95W03, with a case). [Specification] Communication: RS-485/SDLC standard 750 kpps. SN75176B used. Pulse transformer isolated. Cable: Shielded twisted pair to be used (60 nF/km) Power source: DC 24V ± 10% Consumed current: 150 mA [Accessories] (1) Power connector (H4P-SHF-AA) JST *1 (2) Power connectors (H3P-SHF-AA) JST *2 (3) Contacts (BHF-001T-0.8SS) JST *10 * MPC-LNK model will be modified due to production discontinuation of its component ICs within coming years. Although the new series and old series cannot be combined, they can be used in the same software environment. Please take note of this. (2) (3) (1) (1) (2) (1) (2) MPCLNK CEP-028C ACCEL CORP. -10- MPC-816 Series ~ 8-Bit CPU Controller ~ MPC-816K Main CPU Board 8 Outputs, 16 Inputs [Characteristics] This is a CPU board equipped with the I/O for control. By its installed interpreter (TNYFSC), programming is possible in a BASIC-like environment. In spite of its compactness, it is equipped with 2M-bit flash ROM, and its program area of about 2000 steps can be used without any procedure such as ROM conversion or compiling. Also, a user RS-232C (isolated) is equipped, making it applicable to communication-involving use. [Specification] Power source: DC 12V~24V battery-retained for 7 years (w/o external power supply at room temperature). CPU: KL5C80A16, 7.37 MHz, 1M SRAM + 2M FROM. Control I/O: 8-point open collector output, 16-point photocoupler input. Self-consumed current: 110 mA (380 mA power source installed) [Accessories] (1) Housing (PS-D4C50) JAE *1 (2) Power connector (H4P-SHF-AA) JST *1 (3) Contacts (BHF-001T-0.8SS) JST *4 MIF-816K Bus Interface Board 8 Outputs, 16 Inputs [Characteristics] This is the first expansion board of MPC-816. It is a bus interface of expanded I/O: MIO-816 and also equipped with the control I/O at the same time. Also, a 16-pin connector J5 becomes a pulse output port if the Z version is selected on MPC-816, enabling simple control of a pulse motor, etc. Also, MPC-SET (EX) is the set of MPC-816 and MIF-816 being packed in a case. [Specification] Power source: DC 12V~24V (for I/O control). Control I/O: 8-point open collector output, 16-point photocoupler input, 4-axis pulse output port. Consumed current: 30 mA [Accessories] (1) Housing (PS-D4C50) JAE *1 (2) Power connector (H4P-SHF-AA) JST *1 (3) Contacts (BHF-001T-0.8SS) JST *4 (4) Connector (HIF-3BA-16D-2.54R) Hirose *1 (5) Spacers (MSPLS-7) *4 MIF-816AD Bus Interface Board with AD/DA 8 Outputs and 12 Inputs 3CH A/D 1CH D/A [Characteristics] This is the first expansion board of MPC-816 and has almost the same specification with MIF-816. Differences from MIF-816 are that it is equipped with a 12-bit A/D and D/A converter and that J5 has no ZCW and ZCCW output. It is best for small-scale analog test output circuits. [Specification] Power source: DC 12V~24V (for I/O control). DC 5V (for A/D and D/A). Internal V can be also used. Control I/O: 8-point open collector output. 12-point photocoupler input. 3-axis pulse port (w/o ZCW and ZCCW). 3-CH analog input.1-CH analog output. Consumed current: 260 mA (150 mA if A/D and D/A are externally supplied.) [Accessories] (1) Power connector (H4P-SHF-AA) JST *1 (2) Contacts (BHF-001T-0.8SS) JST *4 (3)Spacers (MSPLS-7) *4 MBK-816 Touch-Panel Interface Board RS-422(485) 2CH [Characteristics] This is an I/F board for a touch panel display for MPC-816. It is compatible with Memo-Link of Digital Corp. as of March 99, and it can be interfaced with the panel by using only ON/OFF/SW() commands from the MPC-816 side. [Specification] Power source: DC 12V~24V (for panel communication) Control I/O: RS-422(485) 2CH Consumed current: 200 mA [Accessories] (1) Power connector (H4P-SHF-AA) JST *1 (2)Contacts (BHF-001T-0.8SS) JST *4 CEP-071 MIF-816AD ACCEL CORP .............. .............. ............ CEP-056 MIF-816K ACCEL CORP CEP-072A MBK-816 ACCEL CORP. MPG-916F CEP-080 ACCEL CORP. (2) (1) (3) (4) (5) (2) (1) (3) (3) (1) (2) (1) (2) MPC-816XC Compact Controller 8 Outputs, 16 Inputs [Characteristics] This is a single MPC-816 stored in a case. Please use it when you use one CPU board installed directly in an apparatus. Refer to MPC-816K for the specification details. [Accessories] (1) Housing (PS-D4C50) JAE *1 (2) Power connector (H4P-SHF-AA) JST *1 (3) Contacts (BHF-001T-0.8SS) JST *4 MPC-816XC (1) (3) (2) MPC-SET (EX) Compact Controller 16 Outputs, 32 Inputs [Characteristics] This is a combination of MPC-816 and MIF-816 stored in a case. It can be used also as a controller with 16-point output and 32-point input. Also, because simple ...

Эта инструкция также подходит к моделям:
Компьютерные аксессуары - MPC series (1.01 mb)
Компьютерные аксессуары - MPC-LNK (1.01 mb)
Компьютерные аксессуары - MPC-816 Series (1.01 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории