Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
* [] Current values indicate externally-supplied DC 24V current, and the minimum current values with all I/Os OFF. (1) (2) (3) (1) (2) MOP-048 ACCEL CORP CEP-013B (1) (2) -6- IOP-048 24-Point Photocoupler Input Board / 24-Point Transistor Output Board [Characteristics] This is a dedicated input/output board equipped with 24-points for each input and output. Each input/output is equipped with an LED monitor. The input and output interfaces have equivalent specifications with MOP and MIP, respectively. [Specification] Power source: DC (5V) 12V~24V (for I/O control). 24-point optocoupler input. 24-point open collector output. * If used with DC 5V, the resistor array needs to be replaced. Consumed current: 50 mA [Accessories] (1) Power connector (H4P-SHF-AA) JST *1 (2) Contacts (BHF-001T-0.8SS) JST *4 MPG-3202 S-Shape-Compatible PG Board & Encoder Counter Board (2-Axis) [Characteristics] A general-use PG board loaded with pulse generation and counter ICs that can support two axes. Interface of the pulse output and the encoder is RS-422 specification that can deal with high-speed (1M pps) pulse output and input. The mounted PGIC is X3202 that can deal with the S shape and is equipped with various intelligent functions. [Specification] Power source: DC 12V~24V Pulse output: Differential pulse output *2 axes / RS-422 specification * 2 axes Encoder input: Differential pulse input (A-B phase encoding) * 2 axes [Accessories] (1) Power connector (H4P-SHF-AA) JST *1 (2) Contacts (BHF-001T-0.8SS) JST *4 MRS-402 RS-232 Expansion Board RS-232C [Characteristics] This is a 2CH RS-232C(RS-485) expansion board, of which up to two can be installed. Because it is an intelligent design by dual-port RAM, it does not provide burden on the CPU. The interface is photo-isolated, and the modem control terminal is RTS.CTS only. Software support is dealt with in a similar way to the standard commands and functions, assigned to #3~#6. [Specification] RS-232 standard interface. Input buffer 1K byte. Consumed current: 50 mA [Accessories] (1) Power connector (H4P-SHF-AA) JST *1 (2) Contacts (BHF-001T-0.8SS) JST *4 MPS-324 3A Power Source Board 4(8)-Point Relay Output [Characteristics] Although MPC-68K is equipped with a 1 A power source, when the system scale becomes large, it becomes short of current. In a large-scale system, this MPS-324 is used. The supplied current is 3 A. Also, MPS-324 is equipped with a 4-point relay output circuit (4 more relays can be further added). A PC98-bus compatible DC ±12 V DC-DC converter can be installed on the board. By this, peripheral boards for 98 requiring ±12 V power source can be used. [Specification] Power source: DC 24V±10%. 4(8)-point relay output. Consumed current: 3 A supply [Accessories] (1) Power connector (H4P-SHF-AA) JST *1 (2) Contacts (BHF-001T-0.8SS) JST *4 (3) Connector (HIF-3BA-34D-2.54R) Hirose *1 (1) (2) MRS-402 CEP-059 ACCEL CORP. (1) (2) (1) (2) (3) MPG-3202 CEP-075 ACCELCORP. (1) (2) -7- .............. .............. .............. .............. .............. .............. .............. .............. ............ ............ ............ ............ ............ ............ ............ ............ ........ ........ ........ ........ ........ ........ ........ ........ .......... .......... .......... .......... .......... .......... .......... .......... ........ ........ ........ ........ ........ ........ ........ ........ ............ ............ ............ ............ ............ ............ ............ ............ ........ ........ ........ ........ ........ ........ ........ ........ MBK-68 Multifunction Board RS-422 * 2CH [Characteristics] MBK-68 is a function-addition board of MPC-68K and MPC-683. The following functions are added. Please insert this board to the right end of the rack (on the opposite side of CPU). Bus terminator is added, making a large-scale system more reliable. Display of the statement number during execution is added. 7 SEG display. Digital Corp GP70 Series can be connected. Other supports are under evaluation. Large-scale data arrays can be dealt with by 68K and 683 interpreters. Battery backup function is added to MPC-683. [Specification] Consumed current: 200 mA. Photo-isolated RS422. [Accessories] (1) Power connector (H4P-SHF-AA) JST *1 (2) Contacts (BHF-001T-0.8SS) JST *4 MPC-SLINK Slink I/O Board MAX 256 * 2 (I/O) [Characteristics] MPC-SLNK is a board which supports the Sanks SLINK system. It is equipped with two host module made by Sanks as a default (maximum 512 points). Also, up to two MPCSLNK boards are supported by 68K. Assigned I/O area starts at 2000. [Specification] Consumed current: 200 mA (per module). SLINK specification follows that of Sanks. [Accessories] (1) Housing (5557-08R) Molex *2 [Compatible parts] Please purchase upon necessity. Pressure-attaching tool (57027-5000 (Molex)) Extracting tool (57031-6000 (Molex)) Contacts (5556TL (Molex)) Housing (5557-04R (Molex)) RACK-68K6 6-Slot Rack RACK-68K3 3-Slot Rack [Ch...
Эта инструкция также подходит к моделям:Компьютерные аксессуары - MPC series (1.01 mb)
Компьютерные аксессуары - MPC-68K Series (1.01 mb)
Компьютерные аксессуары - MPC-816 Series (1.01 mb)