The intercom uses digital signals to control the stations called and provide a unique “house code” that prevents other nearby intercoms from accessing the system. Either of two radio frequencies can be selected for the intercoms to further eliminate the chance of interference from adjacent systems. The Console features five station number pushbuttons for selecting the party to call. The ALL CALL button can be used to call all stations. Pressing the TALK button calls the selected station, then co

SPEAK TOWARDS THE CONSOLE RELEASE THE ALL CALL BUTTON WHEN YOU ARE FINISHED TALKING NOTE: ANY CONSOLE WITH ITS MUTE SWITCH ON AND ANY DOORBELL UNITS THAT HAVE NOT BEEN USED IN THE PRIOR 60 SECONDS WILL NOT RECEIVE THE ALL-CALL MESSAGE EXAMPLE: KITCHEN IS CALLING EVERYONE ALL STATION INDICATORS LIGHT KITCHEN CALLS ALL STATIONS KITCHEN CONSOLE 2 WAIT FOR RESPONSE ALL CONSOLES THAT RECEIVED THE ALL-CALL MESSAGE WILL SOUND THE MESSAGE THE CALLER THEN WAITS FOR A PERSON TO RESPOND NOTE: THE CONSOLES

Read all instructions. 2. Use iron only for its intended use. 3. To protect against a risk of electric shock, other liquids. 4. The Iron should always be turned to “min” position from outlet. Never yank cord to disconnect from pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let iron cool completely before putting away. Loop cord loosely around iron when storing. 6. Always disconnect iron from electrical outlet when filling with water and when not in use. 7. Do not operate iron wi

. If liquid has been spilled into the unit. . If the unit has been exposed to water. . If the unit has been dropped or enclosure damaged. . If the unit does not operate normally when following the operating instructions. . When the unit exhibits a distinct change in performance. . When the power-supply cord or plug is damaged. THE USER SHOULD NOT ATTEMPT TO SERVICE THE UNIT. ALL SERVICING SHOULD BE REFERRED TO QUALIFIED PERSONNEL. Changes or modifications to the unit may void the users authority

. . . . . . . . . . . . . . . . . 6 INTRODUCTION Congratulations on the purchase of your new Wireless Intercom System! Please read these instructions carefully before installing your system and follow all of the directions to ensure proper installation. This instruction manual explains in simple steps how to install, use and care for your new Wireless Intercom System in homes, offices or businesses. WIRELESS INTERCOM SYSTEM FEATURES . Allows a choice of 2, 3 or 4 channels to talk to or monitor a

This symbol is intended to alert the user to the presence of important operating and maintenance (Servicing) instructions in the literature accompanying the device. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICE TO QUALIFIED PERSONNEL . WARNING! To prevent fire or shock hazard, do not expose this device to rain, water, or wet locations. . WARNING! Do not insert any metallic obje

. OVERLOADING Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. . REPLACEMENT PARTS When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. . SAFETY CHECK Upon completion of any service or repairs to this p

Read all instructions. 2. Do not touch hot surfaces. 3. To protect against electrical shock in water or other liquid. 4. Close supervision is necessary when children. 5. Unplug from outlet when not in use and before before putting on or taking off parts. 6. Do not operate any appliance with a damaged appliance malfunctions or has been damaged in Consumer Service for examination, repair or adjustment. 7. The use of accessory attachments not recommended by manufacturer may cause injuries. 8. Do no

Do not attempt to modify the plug in any way. ELECTRIC POWER If the electrical circuit is overloaded with other appliances, your appliance may not operate properly. It should be operated on a separate electrical circuit from other appliances. 3 GETTING TO KNOW YOUR WESTINGHOUSE WST5000ZE STEAM & DRY IRON GETTING TO KNOW YOUR WESTINGHOUSE WST5000ZE STEAM & DRY IRON 4 1. Water Fill Port Cover 2. Water Fill Port 3. Adjustable Steam Dial 4. Swivel Cord 5. Heel Rest 2 3 8 67 5 9 6. Cord Winder 7. Red

Read all instructions. 2. Use iron only for its intended 3. To protect against a risk of electric in water or other liquids. 4. The iron should always be turned to unplugging from outlet. Never yank cord outlet; instead, grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let before putting away. Loop cord loosely around 6. Always disconnect iron from electrical outlet when or emptying and when not in use. 7. Do not operate iron with a damaged cord or if the iron has d