2) Press the CH(annel) ^ or Ў button to point to "CAPTION". 3) Press the VOL(ume) ^ or Ў button to select the mode you wish. 4) When done, press the MENU button to exit the menu. PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [ C2] PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [ T1] [ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ^ or Ў button to point to "CHANNEL SET". Then press the VOL(ume) ^ b

Flat Screen Picture Tube . 181 Channel Selection-All VHF/UHF channels plus up to 125 cable channels. . PLL Frequency Synthesized Tuning-Provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons on the remote control. . Sleep Timer . Closed Caption Decoder . Auto Shut Off Function-If there is no signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically. . V-CHIP-Enables parents t

Notes: . The TV distinguishes between standard TV channels and cable (CATV) channels. . The TV may recognize TV channels as CATV channels if reception condition is poor. If this happens, check the antenna connections and try steps 2 to 3 again when reception conditions are better. . If there is no TV signal input, “NO TV SIGNALS” will appear on the display after the completion of channel scanning. NO TV SIGNALS [ADDING/DELETING CHANNELS] You can add or delete channels manually. 1 11 MENU CH CH P

Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 21. SAFETY CHECK - Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22.HEAT - This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. FIGURE A EXAMPLE OF ANTENNA GROUNDING

40. ANGLE Button [page 27] Press to change the camera angle to see the sequence being played back from a different angle. 41. REPEAT Button [page 25] Repeats playback of the current disc, title, chapter or track. 42. A-B REPEAT Button [page 25] Repeats playback of a selected section. 43. SEARCH MODE Button DVD mode [page 24] Press to access or remove the Search display, which allows you to go directly to a specific Title/Chapter/Track/Time. VCR mode [page 18] Press to perform a Time Search or

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WA

The lower ratings will be available for viewing. • When you set the lowest rating to [VIEW], all other ratings will automatically be available for viewing. 4 Exit the V-Chip setting mode Hit [MENU] to return to original mode. -16- EN VIDEO CASSETTE This unit will operate with any cassette that has the mark. For best results, we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS • Avoid moisture. Moisture condensation may occur on the tape if it is move

In the example below, the timer is being set to record: DATE: July 4th, 2003 SETTING TIME: from 7:30PM to 8:50PM CHANNEL: CH61 TAPE SPEED: SP Make sure ... • If a cable box or satellite box is connected with the TV/VCR you will be limited to record only one channel. And the channel selector on the TV/VCR must be selected to the output channel of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes. • Clock must be set to the correct time and date before

Then, press the VOL(ume) ^ button. The tuner scans and memorizes all active channels in your area. . The TV distinguishes between standard TV channels and cable (CATV) channels. . When AUTO MEMO action is completed, the lowest memorized channel reappears on the screen. . When you press the CH(annel) ^ or Ў button after selecting AUTO MEMO, the tuner will stop at the memorized channels only. . The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens,

For Time search function, you can go to a specific point on a tape by entering the exact amount of time you wish to skip. Editing DVD mode Setting/Clearing chapter markers: You can easily add chapter markers anywhere in your recordings for easy editing. (VR mode) Making your own Playlist: With the original remains as it is, you can edit titles on Playlist variously as you prefer. Putting names on titles. Setting pictures for thumbnails. Setting/clearing chapter markers. Deleting parts of titles,