Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
2) Press the CH(annel) ^ or Ў button to point to "CAPTION". 3) Press the VOL(ume) ^ or Ў button to select the mode you wish. 4) When done, press the MENU button to exit the menu. PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [ C2] PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [ T1] [ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ^ or Ў button to point to "CHANNEL SET". Then press the VOL(ume) ^ button. 3) Press the VOL(ume) ^ button so that "ADD/DELETE" is selected. 4) Use the CH(annel) ^ or Ў button to select the channel you wish to put into memory or to erase from memory. Note: The display will disappear automatically in about 10 seconds. Perform "ADD/DELETE" function while this display appears on the screen. . Press the VOL(ume) ^ or Ў button to light up the channel number in LIGHT BLUE if you wish to add the channel into memory. . Press the VOL(ume) ^ or Ў button to light up the channel number in LIGHT RED if you wish to erase the channel from memory. 5) Press the MENU button to exit the menu. ADD/DELETE AUTO PRESET CH PICTURE CHANNEL SET [ENG] / ESP / FRA V-CHIP SET UP CAPTION [OFF] RESUME FUNCTION If the power fails or is disconnected while the TV is powered on, the TV will turn on automatically when the power resumes. . When you press the CH(annel) ^ or Ў button after selecting "AUTO PRESET CH", the tuner will stop at the memorized channels only. . The TV may recognize TV channels to be CATV channels by receiving conditions. In this case, try AUTO PRESET CH action again in the fine receiving conditions. . When AUTO PRESET CH is activated where there is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of channel scanning. OPERATIONS 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the VOL(ume) ^ button so that "PICTURE" is selected. 3) Select the feature you wish to adjust with the CH(annel) ^ or Ў button and adjust it with the VOL(ume) ^ or Ў button. GAME MODE Set to the most suitable position for video games. [+] : ON [-] : OFF BRIGHT Adjust until the darkest parts of the picture are as bright as you prefer. [+] : increase brightness [-] : decrease brightness CONTRAST Adjust to increase or decrease contrast. [+] : increase contrast [-] : decrease contrast COLOR Adjust to be brilliant or pale color. [+] : be brilliant color [-] : be pale color TINT Adjust to obtain natural skin tones. [+] : greenish tone [-] : reddish tone SHARPNESS Adjust to detail in the picture. [+]:increase sharpness [-]:decrease sharpness Notes: . “+” is achieved by pressing the VOL(ume) ^ button and “-” by pressing the VOL(ume)Ў button. : Press the CH(annel) ^ or Ў button. . In the above steps, the picture adjustment display will disappear from the TV screen automatically after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume) ^ button so that "PICTURE" is selected. Then, press the CH(annel) ^ or Ў button repeatedly until the display returns to the screen. . If you adjust another picture control after you set the Game mode to [ON], the Game mode is set to [OFF] automatically. [USING THE GAME BUTTON] You may also set the Game mode and external input mode at the same time by pressing the GAME button on the remote control. “GAME” appears on the TV screen. . To exit the Game mode and external input mode, press the GAME button on the remote control again. . To cancel the Game mode only, adjust the picture control. The GAME mode will be set to [OFF] automatically as explained in the previous section. In this case, “VIDEO” (external input mode) instead of “GAME” appears on the TV screen. . If you press the GAME button when the TV is off, the TV turns on and will be in the Game mode and external input mode automatically. [-] GAME MODE [+] OFF ON [-] BRIGHT [+] [-] CONTRAST [+] [-] COLOR [+] [-] TINT [+] [-] SHARPNESS [+] OPERATIONS (Continued) V-CHIP SET UP V-CHIP enables parents to prevent their children from watching inappropriate material on TV. V-CHIP reads the ratings for programming (except for news and sports programs, unedited movies on premium cable channels and Emergency Broadcast System signals), then denies access to programming if the program's rating meets or exceeds the limitations you select. In this case, "PROTECTED PROGRAM by ..." message appears on the TV screen. To block certain ratings, follow the steps below. . Programming may be rated by the Motion Picture Association of America (MPAA) or according to the Television Parental Guidelines. In order to block any inappropriate programming, set your limits in both places (MPAA RATING and TV RATING). . You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In this case, change to an unblocked channel, then press the MENU button. [MPAA RATING SET UP] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH(annel) ^ ...