DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY 1 64229-02 LOCKNUT-NYL 5/16-18 6 2 64141-6 NUT 5/16-18 4 3 4166074 ENG-HONDA GX270 1 (USED ON 9270-02 MODEL) 4165990 ENG-SUBARU EX27 1 (USED ON 9270-03 MODEL) 4166075 ENG-HONDA GX390 1 (USED ON 9390 MODEL) 4165993 ENG-SUBARU EX40 1 (USED ON 9400 MODEL) 4166420 ENG-ENGINE-VANGUARD 18 1 (USED ON 9570 MODEL) 4 4166778 S-LEVER W/ GRIP 1 (INCLUDES ITEM 6) 5 4166170-01 CABLE-THROTTLE 1 (USED ON HONDA ENGINES) 4166170-02 CABLE-THROTTLE 1 (USED ON SUBARU ENG

All Rights Reserved. ASPIRADORA DE ALTO RENDIMIENTO ASPIRATEUR HAUTE PERFORMANCE © 2004 Little Wonder, Division de Schiller Pfeiffer Inc. Tous droits reserves. © 2004 Little Wonder, Division de Schiller - Pfeiffer, Inc. Todos los Derechos Reservados. Models 5601 and 5611 Modeles 5601 et 5611 Modelos 5601 y 5611 © 2004 Little Wonder, Div. of Schiller-Pfeiffer Inc. All Rights Reserved. ASPIRADORA DE ALTO RENDIMIENTO ASPIRATEUR HAUTE PERFORMANCE © 2004 Little Wonder, Division de Schiller Pfeiffer I

5,826,667. Other US patents pending. Design registrations Granted in USA, Australia, Japan, Great Britain Patent Pending on Cross-Blade System. IMPROPER USE CAN CAUSE SERIOUS INJURY MAKE SURE THIS MANUAL IS READ AND CAREFULLY UNDERSTOOD BEFORE STARTING OR OPERATING THIS EQUIPMENT IMPORTANT MANUAL – DO NOT THROW AWAY Manual always to be available for reference or instructing new operators SUPERVISORS, THIS IS YOUR RESPONSIBILITY ©2003, LITTLE WONDER, Div. Schiller-Pfeiffer, Inc. CONTENTS This pro

(64 cm) de longitud Modelo 2300 Manche 60" (152 cm) Lames 20" (51 cm) Modele 2310 Barra de 60 pulg. (152 cm) Cuchillas de 20 pulg. (51 cm) de longitud Modelo 2310 EXTENDED REACH HEDGE TRIMMERHEDGE TRIMMER T TTAILLE-HAIES AILLE-HAIESAILLE-HAIES A LONG MANCHE PODADORA DE SETOS PODADORA DE SETOSPODADORA DE SETOS DE LARGO ALCANCE © 2003 Little Wonder, Div. of Schiller Pfeiffer Inc. All Rights Reserved. Table of Contents Important Information A. Introduction . . . . . . . . . . . . . . . . . . . . .

Always wear ear protectors where possible. Use face filter to avoid breathing dust. 2. STAY ALERT — Watch what you are doing and use common sense. Do not operate blower when fatigued. 3. KEEP HANDS AWAY FROM AIR INTAKE AND AIR OUTLET CHUTE — Keep both hands on handles when power is on. 4. MAINTAIN AND EXAMINE BLOWER WITH CARE — Follow maintenance instructions given in manual. Do not use the blower if the muffler is defective or missing. 5. STORE BLOWER INDOORS — When not in use, store blower ind

To remove nozzle assembly (for purposes of storage, or clearing blockages): • Turn engine off and disconnect spark plug • Loosen hose clamp on the front plate with flathead screwdriver or 5/16 wrench • Slide hose off of front plate inlet • Bend one side of nozzle bracket inward and twist the assembly to remove the hook from the axle • Twist back and lift to remove the other side of nozzle bracket from the axle WARNING DANGER NEVER RUN OR OPERATE YOUR MACHINE UNLESS DISCHARGE BAG IS ATTACHED, AND

Key # 2 5 14 14 15 16 17 18 19 21 22 23 24 25 26 30 31 32 33 34 35 36 58 Part # 114C 114B 910916 910914 946 910301 900301 900302 179 910526 972 920300 312 405-1 932-1 916-2 163 920007 920009 942 129D 113 934B Description 5/16-18 Nylon Insert Nut 5/16-18 Serrated Flanged Lock Nut 5 HP Honda Engine Honda 6 HP Engine Briggs Throttle Clip Throttle Cable Upper Handle Grip (set of 2) 1/4-20 x 1 3/4 HHCS gr5 10-32 x 3/4 Self tapping Sheet Metal Screw 1/4-20 2-Way Lock Nut Pneumatic Wheel Offset,12" DIA

It may also be used to alert against unsafe practices or property damage. CAUTION used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. SAFETY SAFETY DECALS An important part of the safety system incorporated in this blower are the warnings and informational decals found on various parts of the blower. These decals must be replaced if they become illegible due to abrasion, etc. It is your responsibility to replace t

1. Line trimmer attachment assembly 2. Plastic guard with knife 3. Spool holder 4. Spool with flexible string If you have questions about any topic in this manual,contact your local authorised Mantis dealer. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Special safety information . . . . . . . . . . . . . . . .1 Safety labels . . . . . . . . . . . . . . . . . . . . . . . . . . .2 General safety rules . . . . . . . . . . . . . . . . . . . . .3 MODEL SHAFT TOTAL LENGTH WEIG

ASSEMBLY Blower Assembly Instructions NOTE : Refer to parts lists, and illustrations on Pages 14-17. 1. Install lower handles 15 on top of deck 17 & 18. Secure with (4) cap screws 5/16-18 X 1-3/4 19, (4) 5/16 flat washers 16, and (4) 5/16-18 nylon nuts 1, finger tight. (See Figure 2) 2. Install upper handle 6 with (4) 5/16-18 X 1-3/4 cap screws 19, (8) 5/16 washers 16, and (4) 5/16-18 nylon nuts 1, finger tight. Tighten lower handle nuts and bolts. Tighten upper handle nuts and bolts until the l