You now own a rugged and powerful state-of-the-art machine. Prior to use, we suggest that you carefully read al l o f the instructions. By following the suggestions found in this user manual, you can look forward t o th e reliabl e an d satisfactory performanc e of you r ANTARI Fog Machi ne for years to come. Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your fog machine. Cautions Risk of electric shock. Disconnect the appliance from the

All electrical connections must performed by qualified personal. Be sure the available voltage matches the voltage requirements of the unit. Be sure the power cord is never crimped or damaged. If the power cord is damaged, replace it immediately with a new one of similar power rating. Always disconnect from main power before performing any type of service or any cleaning procedure. Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of the cord. Please be

4 2. Industry Standards .......................................................................................................................................... 5 2.1 USITT .....................................................................................................................................................5 2.2 ESTA ...................................................................................................................................................... 5 2.3 ANSI ...

Improper optimization may add a yellow tint to the lamp output and reduce intensity. The minimum deviation amount is 1.0mm. Running the fixture within a lower deviation can cause damage to the lamp and/or lens. The Design Beam 300™ lamp holder is aligned at the factory. However, due to slight imperfections in all lamps, fine adjustments will improve light performance. Please follow the procedure below for proper lamp optimization: 1. Using a DMX controller or the control panel on the unit, strik

2001 Antari Lighting and Effects Ltd. User Manual Antari Snow Machine Congratulations on the purchase of your new ANTARI Snow MACHINE. Introduction Thank you for choosing an ANTARI Snow Machine. You now own a rugged and powerful state- of-the-art machine. Prior to use, we suggest that you carefully read all of the instructions. By following the suggestions found in this user manual, you can look forward to the reliable and satisfactory performance of your ANTARI Snow Machine for years to come. P

This unit is rated at IP65, ideal for indoor or outdoor applications and includes outdoor rated power and data cables along with a/c power 120v input PPG cable (a 240V model is available). The ELAR EXPAR is power/data linkable and is equipped with an internal power supply. The unit is safe in any working position and can be operated in two user modes: DMX-512 or stand alone. There are two DMX modes, a 3 channel mode and a 5 channel mode. Optional accessories for the ELAR EXPAR include ELAR WR wi

number must also be written down on a piece of paper included in the shipping carton. If the unit is under warranty, you must provide a copy of your proof of purchase invoice. You may obtain a R.A. number by contacting our customer support team on our customer support number. All packages returned to the service department not displaying a R.A. number on the outside of the package will be returned to the shipper. ©Elation Lighting® - - ELED TRI PAR56 Instruction Manual Page 3 ©Elation Lighting®

Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE0711-217 for proper installation in Europe To ensure proper installation, only qualified staff should attempt installation. ©Elation Professional® 13 Design Spot 575E™ Design Spot 575E™ Mounting points Overhead mounting requires extensive experience, including amongst others calculating working load limits, a fine knowledge of the installation material being used, and periodic safety inspection of all installation material and the fixture.

Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 470Remark: When install follow the quick-lock, the dimensional will add 76.5mm. the dimensional 290185113522 18” / 458mm 11.4” / 290mm 7.3” / 185mm 14.5” / 367mm 20.6” / 522mm 25.6” / 645mm 25.9” / 657.5mm 18.5” / 470mm Design Beam 1200C Dimensions 15.5” / 394mm 4.5” / 113mm The Design Beam 1200C (DB 1200C) by Elation Professional is an intelligent 1200 watt compact hybrid spot, wash and beam projector featuring CMY color mixing plus

Eastern Ave. Los Angeles, Ca 90040 • Toll Free (866) 245-6726 DESIGN LED 72MKII™ ©Elation Professional, Los Angeles Ca. 32 14. DIMENSIONAL DRAWINGS 14.8” / 377 mm 12.6” / 319 mm 2.4” / 61 mm 12” / 304 mm 6.7” / 171 mm 13” / 320 mm 7.75” / 197 mm 13.4” / 341 mm Available case colors: black/silver Design LED Panel 72IP MKII Dimensions The Design LED Panel 72IP MKII (DLED Panel 72 MKII) by Elation Professional is a high output, outdoor color L.E.D. wash panel equipped with 72 3W Luxeon K2 L.E.D.’s