Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
All electrical connections must performed by qualified personal. Be sure the available voltage matches the voltage requirements of the unit. Be sure the power cord is never crimped or damaged. If the power cord is damaged, replace it immediately with a new one of similar power rating. Always disconnect from main power before performing any type of service or any cleaning procedure. Only handle the power cord by the plug. Never pull out the plug by tugging the wire portion of the cord. Please be aware that damages caused by manual modifications to the device are not subject to warranty. ©Elation Professional® 5 Design Spot 250™ Design Spot 250™ 2. Safety Instructions The Design Spot 250™ is an extremely sophisticated piece of electronic equipment. To guarantee a smooth operation, it is important to follow the guidelines in this manual. The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual. 1. Always be sure that the fan and the air inlets remain clean and are never blocked. Allow about 6” (15cm) between this fixture and other devices or a wall to allow for proper cooling. 2. Never touch the fixture during normal operation. This can cause severe personal injuries and/or damage to the fixture. 3. Be sure to unplug the DESIGN SPOT 250™ from the power outlet before performing any service related issues. 4. Lamp Replacement; Allow at least 30 minutes after disconnecting main power before you open the DESIGN SPOT 250™. To prevent personal injury, never touch the lamp if you are not absolutely sure it has cooled. 5. Never look directly into the lamp beam. You risk injury to your retina, which may induce blindness. 6. Be sure to track and record the lamp running time. The lamp should be changed at the end of the specified lamp life, regardless of lamp output. You may also have to change the lamp if it shows any deformations or damage. The same is with all glass components, color filters, lenses and mirrors. 7. For safe operation, follow the Installation guide described in chapter two of this manual. Operating the DESIGN SPOT 250™ without suited safety aids such as safety cables or clamps can increase the risk of damage and/or personal injury. 8. Installation should only be performed by qualified and certified personal. 9. When mounting this fixture, use only the original rigging parts included with this fixture. Any structural modification will void the original manufactures warranty and ©Elation Professional® 6 Design Spot 250™ Design Spot 250™ may increase the risk of damage and/or personal injury. 10. To reduce the risk of fire or shock, do not expose this fixture to rain or moisture. 11. Do not attempt to operate this fixture if the power cord has become damaged or frayed. Important Notice: Damages resulting from the disregard of safety and general user instructions found in this user manual are not subject to any warranty claims. ©Elation Professional® 7 Design Spot 250™ Design Spot 250™ 3. Features • Pan 630° or 540° (User selectable) / Tilt 265° • 3 operation mode: DMX controlled, stand alone or sound activated • 8 colors plus white (including UV filter), with two direction rainbow effect • User selectable color change (mode 1: full colors, mode 2: split-colors) • Two Gobos Wheels: o Rotating gobo wheel with 7 rotating gobos plus open, all gobos can be easily replaceable and gobo indexing o Static gobo wheel with 7 static gobos plus open with different speed gobo shaking and gobo indexing • Strobe effect: 0~13 flashes per second or random strobe • Prism and prism rotation, with 16 prism macros • Bright Phillips MSD 250/2 Lamp (250w / 8500K / 3000Hrs / 18,000Lm) • Dimmer intensity from 0%~100% • User Selectable Power Supply (Internal) • Control board with 4-digit display and foil-keyboard • Digital display can be turned 180° to fit different installation position • RDMX (Remote DMX addressing from any DMX console) • Auto test for all functions • Automatic Pan/Tilt Correction • Built-in Iris (5% ~ 100%), with Iris Pulse Effect • Glass Dichroic Reflector for Even Lamp Output • Anti-Reflective Coated Lenses • USITT DMX-512 Complaint • Value of each DMX-channel can be displayed • Electronic Focus via DMX • 8 User Assignable Program Presets - Internal Program: Edit and save programs to the incorporated EEPROM through the front control panel or external controller; you can save a maximum of 48 scenes, and run the saved programs by using the “run” menu on the front control panel ©Elation Professional® 8 Design Spot 250™ Design Spot 250™ 4. GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage, in nightclubs, in theatres, etc. Do not attempt operation or installation without a proper knowledge on how to so. This fixture was designed for indoor use only. Consistent operational breaks may ensure that the fixture will function properly for may years to come. D...