Your operating system can always be upgraded to use FIR products. However you can never downgrade from an FIR product to an SIR product. Therefore make sure that you have not previously installed any other FIR products on your system. Followings are the instructions to properly install the ACT-IR220L+/220L/200L Dongle. You need a computer system with Windows 98 already installed and at least one serial port available. The best choice for the system is a desktop PC. A. Connect ACT-IR220L+/200L se

Release 1.5 ACTiSYS Corporation 2001 All Rights Reserved ACTiSYS Corp. Serial-IR Dongle Installation Manual 20. If your device is physically connected to COM2, highlight Communications ports(COM2), then click Next>. 21. Click Next>. 22. Click Finish Release 1.5 ACTiSYS Corporation 2001 All Rights Reserved ACTiSYS Corp. Serial-IR Dongle Installation Manual WINDOWS ME UNINSTALLATION GUIDE 1. Double click Sys SysSysControl Panel Control PanelControl Panel S SSy yys sst tttte eeeem mmmm icon on Cont

OVERVIEW.............................................................................................................4 2. FEATURES..............................................................................................................4 3. APPLICATION DESCRIPTION.............................................................................5 4. DTE-DB9M CONNECTOR DESCRIPTION.........................................................6 5. CHARACTERISTICS AND SPECIFICATIONS........................

Startup your computer system. 2. Click on Control Panel. 3. Double click System Icon. 4. Click on Hardware tab, then click Device Manager button. 5. Click on Infrared devices, then highlight ACTiSYS IR-220L+Serial Infrared Device. 6. Click Action and then Uninstall. Release 1.5 ACTiSYS Corporation 2001 All Rights Reserved ACTiSYS Corp. Serial-IR Dongle Installation Manual 7. The device has been uninstalled and close device manager, restart your computer. Release 1.5 ACTiSYS Corporation 2001 All

If the host device is a Modem like device and has a RS232 DCE port, then use a "straight cable". That is, connect the signals with the same name from one side to the other. DCE TXD IR100S-L TXD RXD RXD RTS RTS CTS CTS DSR DSR DTR DTR CD CD RI RI GND GND - 15 - Version 1.20 May 27, 2002 ACT-IR100SL and IR100SL-M User’s Manual If the host device is a PC like device and has a RS232 DTE port too, then you need to use a "Null Modem" connection between the two. That is, in/out signal pairs need to be

48511 Warm Springs Blvd, Suite 206 Fremont, CA 94539, USA TEL: (510) 490-8024, FAX: (510) 623-7268 E-Mail: irda-support@actisys.com Web: FCC & VCCI Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING-FCC Regulations state that any unauthorized chang

It is assumed that the user is familiar with the basic operation of Window 98/ME/2000/XP. PARTS CHECK LIST When you unpack the package, the following items should be found. 1. ACT-IR210L Adapter 2. 5 pins Motherboard Connector 3. User’s Guide 4. 5 pins to 6 pins changer SYSTEM REQUIREMENTS To use ACT-IR210L, your computer MUST meet the following requirements. 1. Window 98/ME/2000/XP. 2. Built in infrared I/O controller or super I/O chip on the motherboard with infrared connector available and do

15. Choose Print, the LED on IR100M+/IR100MP will be on and printer begin to print out. Or the parallel LED on the top of IR100M will flash and printer beginning to print out. If not, see Trouble Shooting. TROUBLE SHOOTING AND COMPATIBLE PRINTERS LIST For help on general and miscellaneous problems you may be experiencing with your printing, refer to the following pages for possible solutions. Look up your problem and try the solution. Note: Please Check your printer is on the IR-100M+/IR100M/IR1

It features an integrated IR head and adapter body. The ACT-IR100MP is a new designed Actisys IrDA parallel printer adapter that allows a mobile device to print directly via infrared. It features an integrated IR head and adapter body without external power supply. Small in size and light in weight make it more convenient for traveling users. The ACT-IR100M+/IR100M is compliant with the Infrared Data Association (IrDA) specifications and works with IrDA compliant PCs running Windows 95/98/2000/M

Start : Start the Custom Test. Stop : To Stop the Test Cycle Pause : To Pause the Test Temporarily Continue : To Continue the Test Cycle Exit : To exit from this option C) ABOUT Gives information about the Application and other Contact Information D) QUIT Quit from the Application 5) TEST SCRIPT AND PARAMETERS • Speed Data transfer speed, supports SIR (9600, 19.2K, 38.4K, 57.6K, 115.2K), MIR (0.576M,1.152M) and FIR (4M). • Frame size of the test frame, 64, 128, 256, 512, 1024, or 2048 bytes. Not