Войти: Some otherprocedures require special attention. The WARNING! symbol means that ifyou are not careful, You could injure or kill yourself, or You could damageequipment or property. The ATTENTION! symbol means you should pay special attention to: Important instructions for using the system, or Important instructions for maintaining the system. The Class II Symbol alerts qualified service personnel to use only identical replacement parts in this apparatus. FOR YOUR SAFETY Do not try to open thecase
Any changes must be made in the video.reg registry file. Note: Expect TVs to crop the desktop as TVs normally crop their output. Monitors that are normally attached to PCs are not likely to crop the desktop. Monitors accepting TV input may crop the desktop. For that reason, avoid placing user interface elements near the edge of the display. Note: Some monitors that accept DVI input expect 1280x768 or 1024x768 and may not work with 1280x720 (which is the resolution for 720p). 2.4 VBI Support The
Please send your comments to: EchoStar International Corporation Technical Publications Department Schuilenburglaan 5a 7604 BJ Almelo The Netherlands Preface © 2002 EchoStar International CorporationAll rights reserved 1. DEAR CUSTOMER Thank you for purchasing an EchoStar satellite receiver. This receiver is of the latest generation for which it is possible to upgrade the software to keep up with the newest developments. Please read this user manual carefully, to be able to safely install, use a
Changing the Remote Control Address Because UHF signals travel long distances and go through walls, a neighbor’s remote may control your receiver by mistake. To prevent this, you can change the remote address. 1 Press SYSTEM INFO on the receiver's front panel. The System Information screen displays on the TV and shows the Remote Address. Write down the Remote Address: 2 Press and hold SAT on your remote control for about three seconds, until all of the mode buttons light up, and then release SAT
If you do some of these procedures carelessly, you could injure or kill yourself or damage equipment or property. Some other procedures require special attention. The WARNING! symbol means that if you are not careful, You could injure or kill yourself, or You could damage equipment or property. The ATTENTION! symbol means you should pay special attention to: Important instructions for using the system, or Important instructions for maintaining the system. The Class II Symbol alerts qualified ser
Intel® Digital Set Top Box Display Driver User’s Guide for Microsoft* Windows* CE 5.0 4.1.7 Direct3D Mobile Options Direct 3D Mobile is supported on the 830 and 854. [HKEY_LOCAL_MACHINE\System\D3DM\Drivers] RemoteHook
The Remote TV is also referred to as “TV2.” You can tell your receiver is in Dual Mode because the Mode front panel indicator will light and the menu and other screens will display Dual Mode (as shown below). Chapter 2 14 Dual and Single Modes Single Mode Single Mode provides dual-tuner receiver features—like Picture-in-Picture (PIP) and the ability to watch one live program while recording another—to all connected TVs. Single Mode delivers the same programming to all of the TVs connected to the
The payment of that amount and/or the termination of Services shall not prejudice our ability to exercise any other rights and remedies we may have under this Agreement, at law, in equity, or otherwise. F. Additional Receivers. DISH Network will allow you to place up to five additional receivers on your account. Each additional receiver would be authorized to receive the same Services as your initial receiver. DISH Network will charge you a reduced monthly fee (Additional Receiver Authorization
