b. Align the arrow on the housing wdith the line on the shoe Fig. 7. c. Rotate the shoe to the desired angle. After setting the shoe, tighten it by returning the shoe lever to its oringinal position. NOTE: The shoe will be difficult to bevel at first. Ensure the shoe lever is up and the two arrows shown are aligned. Gently rock the shoe from side to side to loosen. At 0°, the shoe may slide back to allow for cutting in tight work areas. Lift the shoe lever, slide the shoe back and depress the le

3. The completion of charge will be indicated by the red light remaining ON continuously. The pack is fully charged and may be used at this time or left in the charger. WARNING: Don't allow any liquid to get inside charger. Electric shock may result. To facilitate the cooling of the battery pack after use, avoid placing the charger or battery pack in a warm environment such as in a metal shed, or an uninsulated trailer. 3 English English CAUTION: Neverattempt to open the battery pack for any rea

To remove Tires 1. Using a 1/8" hex head wrench loosen set screw in hub collar. 2. Slide hub collar from axle and remove the tire. STorAGE Engine U Consult the engine instruction manual for the manufacturer's recommendations for storage. Pump The manufacturer recommends using a pump protector/winterizer, such as DeWALT winterizer (DP80) when storing the unit for more than 30 days and/or when freezing temperatures are expected. DeWALT winterizer (DP80) is availabe at the store where the pressure

Questions? See us in the World Wide Web at INSTRUCTION MANUALGUIDE D'UTILISATIONMANUAL DE INSTRUCCIONESDW307M, DW308M, DW309VS Reciprocating SawsScies alternatives a regulateur de vitesseSierras reciprocantes VV INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO YPOLIZA DE GARANTIA. ADVERTENCIA: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. Questions? See us in the World Wide Web at DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286 Printed in U.S.A. (JUN00-CD-1) Form No. 386109

Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the risk of electric shock. 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating

Si tiene dudas o comentarios, contactenos. InstructIon ManuaL GuIDe D'utILIsatIon ManuaL De InstruccIones INSTRUCTIVO DE OPERACION, CENTROS DE SERVICIO Y POLIZA DE GARANTIA.aDVertencIa: LEASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. 1-800-4-DeWALT • DP2800 Pressure Washer Laveuse a pression Lavadora a presion English Specifications MODEL WEIGHT HEIGHT WIDTH Length PSI Max* Op erating PSI GPM Max* Op erating GPM Engi ne DP2800 97 lbs 26.5" 23" 40" 2800 2520 3.0 2.7 Honda 6.5 Hp GX200 * Water f

Push in and hold the button on the side handle. to the locked position (G). The chuck will 2. Move the rod so the distance between the end of the rod and click when properly installed. end of the bit equals the desired drilling depth. 3. Release the button to lock rod into position. DRILLING IN METAL (D25103, D25203, D25303, D25304) When drilling with the depth rod, stop when end of rod reaches surface of material. An SDS to round shank adaptor chuck is required. Ensure that tool is in drill-onl

• Improperly stored fuel could lead to acciden tal ignition. Fuel im prop erly secured could get into the hands of children or oth er un qual i fied persons. • Use of acids, toxic or cor ro sive chemicals, poisons, in sec ti cides, or any kind of flam ma ble solvent with this product could re sult in se rious injury or death. live plants) that could be damaged from muffler exhaust heat. • Store fuel in an OSHAap proved con tain er, in a se cure location away from work area. • Do not spray flamma

• If engine does not start after two pulls, squeeze trigger of gun to relieve pump pressure. Pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury. • Keep children away from the pressure washer at all times. • Do not overreach or stand on an unstable support. • Do not use pressure washer while standing on a ladder. • Grip gun/wand firmly with both hands. Expect the gun to kickback when triggered. DANGeR: RISk of INjuRy oR PRoPe