91000051, Revision B This manual is published by DYNEX Technologies, Inc. Questions or comments regarding the content of this manual can be directed to the address below or to your DYNEX Technologies representative. DYNEX Technologies 14340 Sullyfield Circle Chantilly, VA 20151-1683 USA Tel. (703) 631-7800 (800) 288-2354 Fax. (703) 803-1441 OPSYS MWTM is a trademark of DYNEX Technologies, Inc. © 2006 This document is the copyright of DYNEX Technologies and must not be copied or reproduced in any

Click OK. 3. Restart the computer. Windows will complete the driver installation automatically. Select Specify a location, and click Browse to search for driver files and open it, e.g., (CD-ROM) D:\DRIVER\Win98SE. Click Next. 4. Windows found the driver of this modem. Click Next. Click Finish to complete the installation. Features DX-M300 supports the following communication standards. ITU-T is also known as CCITT. Data • V.92 (Lite) • V.90, V.34, V.32bis, V.32, V.22bis, V.21, V.22 • Be

Warning: To avoid traffic accidents, never wear headphones when driving a car or riding a bicycle. Charging the built-in battery To charge the battery: 1 Turn off the player. The battery charges only when the power to the player is turned off. 2 Connect the supplied AC power adapter to the DC input jack on the player, then plug the adapter into an AC power outlet. When the battery is charging, the charge indicator LED turns red. When the battery is fully charged the indicator turns off. 3 Unplug

For… Use this adapter… iPod Mini (4 GB/6 GB) 3 iPod (20 GB/U2 Special Edition) 4 iPod (40 GB) 5 iPod with color display (20 GB/30 GB/U2 Special Edition) 6 iPod with color display (40 GB/60 GB) 7 iPod Nano 8 iPod Video (30 GB) 9 iPod Video (60 GB) 10 2 Place your iPod in the docking station. 3 Remove the plastic tab on the remote control before using the fi rst time. DX-IPDR.1 Connecting to a TV using the S-Video or A/V cable 1 To connect S- Video, plug the S- Video cable into the docking station

2 Secure the stand column to the stand with the four screws with washers provided. 3 Lay your TV/DVD combo face down on a soft, dry, and lint free surface. Align the bottom side of the TV/DVD combo with one edge of the table. 4 Slide the stand column into the slot in the bottom of the TV/DVD combo. 5 For DX-26LD150A11, secure the stand column to the TV/DVD combo with the ve screws and washers provided. For DX-32LD150A11, secure the stand column to the TV/DVD combo with the eight screws and washe

6№#iœiï№. ffl^ipmaSlMouse Suite »g«#) »»H Wte • ffl*t«XÈ*±-^Rrffl«IUSBSP. Windows ssMiai*. Wheel Molette Rueda Function buttons Touches de fonction Botones de función 3)№ü Function Description Left button For left clicking Right button For right clicking Wheel For scrolling Leftside button For going back to a previously viewed item in programs that support the"Back" command, such as Web browsers Right side button For going to the next item in programs that support the “Forward" comma

Turn on the video source you’ve connected, then set OHMS 75/1K on the RF Modulator to the position that results in the best TV picture. The video signal indicator light will be on when the RF Modulator is receiving a signal from an A/V source. To return to normal television viewing, turn the power off on the video component that is connected to the RF Modulator._ RF MODULATOR Audio/Video Signal Converter SPECIFICATIONS RF Output Level_________________________ 66 ± 3.5dB ^V RF Output Channel

Enter your model number in the Search field, then press Enter. Click Support/Downloads. Connecting a DVD or Blu-ray DVD player, cable box, satellite receiver, or game station Using HDMI (best) Using component cables (better) Using composite cables (good) Connecting an antenna/cable wall jack Connect a coaxial cable (not included) to the ANT/CABLE IN jack on the back of your TV and to the Antenna/Cable wall jack. Connecting a Home Theater System Using Digital audio Using Analog audio Front featur

Installing a wall-mount bracket 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the four screws that secure the base to the stand, then remove the base. 3 Remove the four screws that secure the stand column, then remove the column. 4 Attach the wall-mount bracket to your TV using the mounting holes on the back of your TV. See the instructions that came with the wall-mount bracket for information about how to corr

2 Lay the TV on a at, cushioned surface. 3 Carefully align and insert the base into the stand until the locking mechanism clicks into place. Installing a wall-mount bracket 1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and scratches. 2 Remove the three screws holding the TV to its stand column, then remove the stand column. 3 Insert and lock the stando screws (provided) into into the 4 holes on the back of the TV.. 4 Secure the wall-m