Войти:
Оценок - , средний балл: ( )

Инструкция по эксплуатации HP, модель HP NetServer LC 3

Производитель: HP
Размер: 67.13 kb
Название файла:

Язык инструкции:en

Документ загружается, подождите пожалуйста
Скачать инструкциюЗакрыть
Документ загружается, подождите пожалуйста
Скачать инструкциюЗакрыть


К этому устройству также есть другие инструкции:

Фрагмент инструкции


System software:
Navigator version
L.14.00 or later
Operating System
Microsoft Windows NT Server 4.0, Enterprise Edition.
Service pack
SP3 with hotfix “clusfixi” or later
Single Points of Failure
The Model 30/FC Disk Array virtually does not have single points of
(SPOF)
failure. However, care should be taken to bind LUNs as described in the
Model 30/FC Disk Array manual. The manual addresses topics such as;
spreading LUNs equally across internal buses and using RAID modes. In
a cluster configuration, single points of failure arise due to the method
used to connect the disk array to the server. These single points of failure
are as follows:
• Due to Windows NT inability to allow for dual data paths, a total
fibre-channel hub failure (removal of power from the hub,
catastrophic failure of multiple hub ports) will result in the loss of the
cluster. It is possible to power the hub using an UPS to remove part
of the issue, however an unforeseen total hub failure would still be a
single point of failure. Current data on the fibre channel hub
indicates that risk in this area is minimal.
• If the data connection between the hub and Model 30/FC Disk Array
is broken the cluster will go down. The fibre channel cables are
generally known to be robust with an insignificant possibility of
failure.
• A failure in the storage processor of the Model 30/FC Disk Array
will result in a loss of the cluster. The possibility of the storage
processor failing is small. Current configurations do not allow for
failover to another storage processor in the Windows NT
environment.
SPU
Model
HP NetServer LXr 8000
Clock speed
400 MHz. or higher
No. of CPUs
2 – 4
BIOS version
Release 1 or later
CPU cache
Any size
RAM
256 MB minimum. Must be HP.
No. of power supplies
3
Local storage
Internal or external, using any controller except NetRAID 1 or 3. Must
use HP disks. See Local Storage below.
I/O slots:
P3 – P4 Shared storage controller
P1 – NetRAID local storage
P5 – Intra-cluster (Heartbeat) LAN
P6 – Client LAN
All others – Any other plug-in cards.
2

...

Эта инструкция также подходит к моделям:
- ()
Компьютеры - HP NetServer LC 2000 (67.13 kb)
- ()
Компьютеры - HP NetServer LC 2000r (67.13 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории