Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP NetServer LC 3

Производитель: HP
Размер: 27.71 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


SPU
Model
HP NetServer LXr Pro8
Clock speed
200 MHz.
No. of CPUs
2-8 (at least 2 are required for each node; increment of 2)
BIOS
1.03 or later
CPU cache
1 MB
RAM
256 MB minimum. Must be HP.
No. of power supplies
4
Local storage
Internal or external, using any controller. Must use HP disks. See Local
Storage below.
I/O slots:
P5-P7 - Shared storage HBAs. See Shared Storage.
P4 - Intra-cluster LAN
P3 - Client LAN
All others - Any other plug-in cards.
LANs
Intra-cluster LAN
Client LAN
LAN connection
HP D5954A crossover cable or any
Any LAN
equivalent only
The intra-cluster LAN may only be
used for cluster node
communication via a crossover
cable. It may not be used for client
communication.
NIC:
Model
HP D5013A (10/100TX PCI)
Any that is on both the HP Tested
(or HP J3171A)
Products List and the Microsoft
Hardware Compatibility List.
Driver
2.24.00.0000 or later
Any driver
If the NIC used is the same as the
Intra-cluster LAN, then the Client
LAN must use the same driver as
the Intra-cluster LAN.
No. of NICs
1
1 minimum
SPU I\O slot
P4
P3
Local Storage
Physical drive location
SPU internal drive bays, HP external drive cabinet (e.g., HP Rack
Storage/8), or any combination.
Disk drives
Must be HP.
Controller
SPU embedded controller or any controller (any number, manufacturer or
driver) in any available I/O slot (see SPU I/O slots above).
SCSI bus
Any HP cables that meet SCSI specifications and any SCSI bus speed.
2

...

Эта инструкция также подходит к моделям:
Компьютеры - HP NetServer LC 2000 (27.71 kb)
Компьютеры - HP NetServer LC 2000r (27.71 kb)
Компьютеры - HP NetServer LC II (27.71 kb)
Компьютеры - HP NetServer LC Plus (27.71 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории