Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP NetServer LC 3

Производитель: HP
Размер: 105.42 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции



HP NetServer LH4
with
HP Rack Storage/12FC
Windows 2000 Advanced Server
Cluster Configuration Guide
20 June 2000
(see Versions at the end of this document)
Introduction
This document defines the supported HP NetServer LH4 using the HP Rack Storage/12FC and Microsoft
Cluster Server . This configuration minimizes single points of failure (SPOF), provides maximum availability,
and has been certified by Hewlett-Packard and Microsoft. This guide is prescriptive; it describes the
configuration supported by HP. Any deviance to this configuration can result in an inoperative cluster or an
operating cluster with degraded performance, hidden SPOFs, etc., and therefore will not be supported by HP.
What’s Defined in a Cluster
• Cluster
• SPUs
• Local and Shared Storage
• Intra-cluster and Client LANs
• Shared Storage Cabling
Cluster
Type of SPUs
HP NetServer LH4
Each node must be the same model SPU, but may have different size
main memory, cache, and CPU clock speeds.
Installation
Pedestal or racked
Number of nodes
2
Shared Storage
HP Rack Storage /12FC with HP Fibre Channel Host Bus Adapter and HP
disks. See Shared Storage below.
LANs:
Client LAN
Any NIC that is HP and Microsoft approved. See Client LAN below.
Intra-cluster
HP D5013A with crossover cable. See Intra-cluster LAN below.
(Heartbeat) LAN
Power source
Direct from power mains, power conditioner or uninterruptible power
supply (UPS) using any power conditioner or UPS.
1

...

Эта инструкция также подходит к моделям:
Компьютеры - HP NetServer LC 2000 (105.42 kb)
Компьютеры - HP NetServer LC 2000r (105.42 kb)
Компьютеры - HP NetServer LC II (105.42 kb)
Компьютеры - HP NetServer LC Plus (105.42 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории