Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP NetServer LC 3

Производитель: HP
Размер: 74.69 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции



HP NetServer LH 3
with
A3661B High Availability Disk Array Model 30/FC
Cluster Configuration Guide
20 November 1998
Introduction
This document defines the supported HP NetServer LH 3 with A3661B High Availability Disk Array
Model 30/FC (LH 3/Model 30-FC) configurations for Microsoft Cluster Server. These configurations
minimize single points of failure, provide maximum availability, and have been certified by Hewlett-
Packard and Microsoft. This guide is prescriptive; it describes the HP NetServer LH 3 / Model 30-FC
configurations supported by HP. Any configuration not expressly allowed by this guide will not be
supported by HP.
What’s Defined in Cluster
Cluster
SPUs
Local and Shared Storage
Intra-cluster and Client LANs
Shared Storage Cabling
Cluster
Type of SPUs
HP NetServer LH 3
Each node must be the same model SPU, but may have different size main
memory, cache, and CPU clock speeds.
Installation
Pedestal or racked
Number of nodes
2
Shared Storage
HP Rack Storage/8 with HP NetRAID controller and HP disks. See
Shared Storage below.
LANs:
Client LAN
Any NIC that is HP and Microsoft approved. See Client LAN below.
Intra-cluster
HP D5013A or J3171A only with crossover cable. See Intra-cluster LAN
(Heartbeat) LAN
below.
Power source
Direct from power mains, power conditioner or uninterruptible power
supply (UPS) using any power conditioner or UPS.

...

Эта инструкция также подходит к моделям:
Компьютеры - HP NetServer LC 2000 (74.69 kb)
Компьютеры - HP NetServer LC 2000r (74.69 kb)
Компьютеры - HP NetServer LC II (74.69 kb)
Компьютеры - HP NetServer LC Plus (74.69 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории