Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP NetServer LC 3

Производитель: HP
Размер: 22.34 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


HP Netserver LXr 8500dc with
XP256/512/48 Fibre Channel
®
Windows 2000 Datacenter Server
DC.01.03 Cluster Configuration Guide
Introduction
This document defines the server cluster configurations supported by Hewlett-Packard for interconnection of
two to four HP Netserver LXr 8500r servers and one HP XP256, XP512, or XP48 disk array, with Microsoft®
Windows® 2000 Datacenter Server software. These configurations provide high server cluster availability
and minimize single points of failure (SPOFs). A configuration certified and supported by both Hewlett-
Packard and Microsoft® is included, but any cluster configuration that conforms to the guidelines of this
document will be supported by Hewlett-Packard. Deviations from the supported configurations can result in
an inoperative cluster, an operating cluster with degraded performance, or hidden SPOFs. Therefore,
deviations are not supported. For revision/update information on this document, refer to Versions on page 6.
Cluster Configuration Elements
This section identifies the hardware components, system software, network interfaces, and power distribution
arrangement required to build an operational server cluster supported by Hewlett-Packard. The various
server cluster elements are listed below and their associated configuration data is detailed in separate tables
and illustrations that follow.
• Server configuration
• Shared storage configuration
• Microsoft® and HP certified server configuration
• Intra-cluster (heartbeat) LAN configuration
• Client LAN configuration
• Fibre Channel cabling configuration

Server Configuration
Parameter
Specification
Server

Type
HP Netserver LXr 8500dc
Number of nodes
Two to four

Each node must be the same server type, and must have same clock speed. Number
of CPUs and main memory sizes may vary between nodes.
Clock speed
700, or 900 MHz
Number of CPUs
Two to eight
BIOS
ASPN, Release 10
CPU cache
2 MB
RAM
2 to 32 GB. Must be HP.
I/O Slots
Added cards listed as supported in this guide may be installed in any appropriate
server I/O slot
11/9/01 1

...

Эта инструкция также подходит к моделям:
Компьютеры - HP NetServer LC 2000 (22.34 kb)
Компьютеры - HP NetServer LC 2000r (22.34 kb)
Компьютеры - HP NetServer LC II (22.34 kb)
Компьютеры - HP NetServer LC Plus (22.34 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории