Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель HP NetServer LC 3

Производитель: HP
Размер: 277.02 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


HP Netserver LC 2000
with
HP Rack Storage/12FC and HP Rack Storage/12
®
Windows NT Server 4.0 Enterprise Edition
Cluster Configuration Guide
Introduction
This document defines the server cluster configurations supported by Hewlett-Packard for interconnection of
two HP Netserver LC 2000 servers, one HP Rack Storage/12FC disk drive enclosure, and one or two optional
HP Rack Storage/12 disk drive enclosures, with Microsoft® Cluster Server software. These configurations
provide high server cluster availability and minimize single points of failure (SPOFs).
NOTE
Both SPOF and SPOFless configurations are included in this document. For more
information about configuring a SPOFless cluster, refer to the HP white paper, High
Availability MSCS Cluster Solution on the HP NetServers, HA Planning website.
A configuration certified and supported by both Hewlett-Packard and Microsoft® is included, but any cluster
configuration that conforms to the guidelines of this document will be supported by Hewlett-Packard.
Deviations from the supported configurations can result in an inoperative cluster, an operating cluster with
degraded performance, or hidden SPOFs. Therefore, deviations are not supported. For revision/update
information on this document, refer to Versions on page 10.
Cluster Configuration Elements
This section identifies the hardware components, system software, network interfaces, and power distribution
arrangement required to build an operational server cluster supported by Hewlett-Packard. The various
server cluster elements are listed below and their associated configuration data is detailed in separate tables
and illustrations that follow.
• Server configuration
• Shared storage configuration
• Microsoft® and HP certified server configuration
• Intra-cluster (heartbeat) LAN configuration
• Client LAN configuration
• Fibre Channel cabling and power distribution configuration

Server Configuration
Parameter
Specification
Server


Type
HP Netserver LC 2000, Ultra2 or Ultra3 embedded SCSI models

Number of nodes
Two
Each node must be the same server type. Do not mix ultra2 and ultra3 server
models within a cluster. Clock speed, cache sizes, and main memory sizes may
vary between nodes.

Installation
Pedestal or racked

12/20/01
1

...

Эта инструкция также подходит к моделям:
Компьютеры - HP NetServer LC 2000 (277.02 kb)
Компьютеры - HP NetServer LC 2000r (277.02 kb)
Компьютеры - HP NetServer LC II (277.02 kb)
Компьютеры - HP NetServer LC Plus (277.02 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории