Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
•Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. • Future upgrades of application and system software and any changes in specifications and functions will be announced at the following website. • The screen displays as illustrated in this manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. • Windows is the registered trademarks of Microsoft® Corporation. • The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. M7CL V2 Editor Installation Guide M7CL V2 Editor The M7CL V2 Editor (subsequently called M7CL Editor) enables you to prepare the M7CL version 2 mixing console (M7CL-48 and M7CL-32: subsequently called M7CL) settings beforehand by editing the parameters offline, and also remotely monitor/control the M7CL online. Installing the Software Procedures Windows 1 Verify that your system meets the operating requirements of each software program. page 3 2 Install the appropriate driver to your computer. page 4 3 Install the Studio Manager and each editor. page 5 4 Start up the Studio Manager, then start up the editor. page 8 For subsequent operations, refer to the PDF manual from the [HELP] menu in each software program. Software installation Minimum System Requirements The system requirements below may differ slightly depending on the particular operating system. OS Windows XP Professional SP2 or later/XP Home Edition SP2 or later/Vista (32-bit) Hard Disk 30MB or more Display 1024 x 768 pixels or higher; High Color (16-bit) or higher Other Pointing device such as a mouse, Ethernet (100BASE-TX/10BASE-T) port Windows XP Professional SP2 or later/XP Home Edition SP2 or later CPU 1GHz or higher Intel Core/Pentium/Celeron family processor Available Memory 512MB or more Windows Vista (32-bit) CPU 1.4GHz or higher Intel Core/Pentium/Celeron family processor Available Memory 1GB or more n The Minimum System Requirements described above are applied to the M7CL V2 Editor version 2.5.0. Keep in mind that the software is often updated and the system requirements are subject to change. You can check the latest version information of each program and its system requirements at the following website The system requirements may differ slightly depending on the particular computer. M7CL V2 Editor Installation Guide M7CL V2 Editor Installation Guide 4 Installing softaware To use M7CL Editor, you’ll need to install the following software programs. Follow the appropriate instructions below. • DME-N Network Driver To operate the M7CL from your computer via Ethernet, you'll need to install the DME-N Network Driver software. DME-N Network Driver is software that transfers MIDI data back and forth between your computer and the M7CL via Ethernet cable. • DME-N Network Driver • Studio Manager • M7CL Editor You can download the latest version of DME-N Network Driver at the following website. For specific installation instructions, refer to the installation guide included in the downloaded file. Ethernet cable M7CL Computer Editor Ethernet cable Network switch or Crossover cable Driver Studio Manager Installation Studio Manager Installation You can download the latest version of Studio Manager at the following website. For specific installation instructions, refer to the installation guide included in the downloaded file. M7CL Editor Installation Follow the instructions below to install the software programs. 1 Extract the data from the downloaded compressed file and open the “m7clv2_edt***_win” folder. “***” represents the version number. 2 Double-click “setup.exe.” A setup dialog of M7CL Editor is displayed. n When using Windows Vista, if the “User Account Control” window appears, click [Continue]. 3 Follow the on-screen instructions to install the software. n For specific instructions on using the software, refer to the PDF manual from the [HELP] menu in each program. Uninstall (removing the installed application) To remove the installed editors and Studio Manager: When using Windows XP Select [START] > [Control Panel] > [Add/Remove Programs] > [Install/Uninstall], then select the application to be removed and click [Add/Remove…]. Follow the on-screen instructions to uninstall the application. When using Windows Vista Select [START] > [Control Panel] > [Programs and Features] > [Uninstlall or change a program], then select the application to be removed and click [Uninstall/Change]. Follow the on-screen instructions to uninstall the application. If the “User Account Control...
Эта инструкция также подходит к моделям:Музыкальные инструменты - M7CL-32 (527.46 kb)
Музыкальные инструменты - M7CL-48ES (527.46 kb)