Войти:
Оценок - 3, средний балл: 4.3 ( )

Инструкция по эксплуатации Yamaha, модель M7CL-48

Производитель: Yamaha
Размер: 3.91 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


If you perform an Undo operation twice in a row, you can cancel the two most-recent operations. If you perform an Undo operation three times in a row, you can cancel the three most-recent operations. In this way, you can cancel multiple recent operations. The following table describes how to use the Undo/Redo function. Undo Choose [Undo] from the [Edit] menu. Redo Choose [Redo] from the [Edit] menu. Please note, however, that after you perform one of the following operations, you cannot successfully undo or redo any previous operation: •Operations on the M7CL console • Quitting Studio Manager •Synchronizing with the M7CL console •Session operations NOTE You cannot Undo or Redo the following operations: • Edits in the Setup window • Synchronization • Opening and closing the windows • Resizing or moving the windows There are certain other operations that cannot be undone, depending on the function. NOTE For library or scene operations, Undo/Redo applies only to the single most recent operation. You cannot undo any operations prior to this. Undo/Redo in these windows is available only using the [UNDO] button within the respective window. Even if you perform a scene recall from the Master window, you cannot use a shortcut or menu operation to undo the recall. M7CL V2 Editor Owner’s Manual 6 Window operations You can select and open each window from the [Windows] menu. For the INPUT CH window and Effect Editor window, use the sub-menu to select the channels or library you want to see. You can choose Tile or Cascade to arrange the windows within the editor. . Tile . Cascade In the Library window or Scene window, click the tabs located at the top of the window to switch between pages. M7CL V2 Editor Owner’s Manual 7 8 M7CL V2 Editor Owner’s Manual Synchronizing M7CL Editor When M7CL Editor starts up, the parameter settings on the console and the parameter settings in M7CL Editor may be different. Therefore, you must first match the parameter settings on the console with those in M7CL Editor. This operation is called “synchronization.” Follow the steps below to synchronize M7CL Editor. 1 Select [Synchronize], then [Re-synchronize]. The following window opens. 2 Select whether you want to transfer your settings to M7CL Editor, or vice versa. At this time, the All Libs option determines whether or not Scene and Library data is synchronized. PC . Console: Transfers the current parameter settings in M7CL Editor to your console. Console . PC: Transfers the current parameter settings of your console to the M7CL Editor. 3 Click [OK]. Do not operate the console while synchronization is in progress. If you use the “Total Recall” function in Studio Manager, all selected Editors in Studio Manager are synchronized with the corresponding devices. Offline Edit Function If you do not want to synchronize your console with M7CL Editor, select [Offline Edit] from the [Synchronization] menu. To apply your off-line edits to your console, select [Re-Synchronize] from the [Synchronization] with the PC -> Console option to synchronize the console with M7CL Editor. The Offline Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the Sync window. Some effect parameters in the console change their displayed values depending on the sampling frequency. If you switch M7CL Editor from OFFLINE to ONLINE, displayed parameter values may change because M7CL Editor loads the sampling frequency from the console and updates the display. Other Functions .Resetting to the default value (Ctrl+click) Move the cursor to a control or a parameter value, then hold down the key and click the mouse button to reset the value to the default (e.g., to reset a pan setting to Center). ................ ...... .............. ............ ...... ...... ........ .......... ...... ...... ............ ...... .... ...... .... – . .................... .... ...... .............. ............ . Ctrl+Shift+Click Move the mouse cursor to a channel fader or to a send knob or bar graph, and click while holding down the key and key to set the nominal value regardless of the default value. NOTE NOTE Master window Master window .CHANNEL SELECT This indicates the number and name of the channel to which your operations will apply. To switch channels, you can either click the [SELECT] button and choose from the list that appears, or you can click the left/right arrow-shaped channel select buttons. You can also use the channel name text box to edit the name. This is linked with the [SEL] keys on the M7CL itself. You can right-click the icon to select a different one. .SYNC This indicates the status of connection and synchronization between M7CL Editor and the M7CL. A[ONLINE]/[OFFLINE] button The ONLINE/OFFLINE status will alternate each time you click this button. This has the same function as [Synchronization] menu .[Offline Edit]. (. p.8) 1 2 This indicator is shown when M7CL Editor is correctly connected to the M7CL itself. In this sta...

Эта инструкция также подходит к моделям:
Музыкальные инструменты - M7CL-32 (3.91 mb)
Музыкальные инструменты - M7CL-48ES (3.91 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории