Войти:
Оценок - 4, средний балл: 3.3 ( )

Инструкция по эксплуатации Yamaha, модель M7CL-48

Производитель: Yamaha
Размер: 4.33 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


You can click this repeatedly to repeat Undo and Redo. M7CL Editor Owner’s Manual 44 Patch Editor window Patch Editor window This window is divided into INPUT PATCH, OUTPUT PATCH, INPUT INSERT PATCH, OUTPUT INSERT PATCH, DIRECT OUT PATCH, and PATCH LIST pages. To switch pages, click the tabs shown in the upper part of the window. To display this window, choose [PATCH Editor] from the [Windows] menu, and select either “INPUT PATCH,” “OUTPUT PATCH,”“INPUT INSERT PATCH,”“OUTPUT INSERT PATCH,”“DIRECT OUT PATCH,” or “PATCH LIST.” INPUT PATCH page Here you can select the input port that is assigned to the input of each input channel. .PRESET Initializes the patching in this page. .CLEAR ALL Clears all patching in this page. M7CL Editor Owner’s Manual 45 OUTPUT PATCH page Here you can select the input port that is assigned to the output of each output channel. INPUT INSERT PATCH page Output port selection Input port selection Here you can assign input/output ports to the insert-in/out of each input channel. Select the output port in the left side of the screen, and the input port in the right side of the screen. M7CL Editor Owner’s Manual 46 e Output port selection Input port selection Here you can assign input/output ports to the insert-in/out of each output channel. Select the output port in the left side of the screen, and the input port in the right side of the screen. DIRECT OUTPUT PATCH page Here you can select the output port that will directly output each input channel. M7CL Editor Owner’s Manual 47 PATCH LIST page Here you can view and edit the input patch and output patch settings. 1 2 3 4 5 6 AInput channel number BInput channel name This is the number and name of the input channel. You can click the channel name box to edit the name in this page. CInput port This shows the input port assigned to the input channel. You can click this box and choose the input port from the popup menu that appears. DOutput channel number EOutput channel name This is the number and name of the output channel. You can click the channel name box to edit the name in this page. FOutput port This shows the output port assigned to the output channel. You can click this box and choose the output port from the popup menu that appears. M7CL Editor Owner’s Manual 48 Rack window Rack window . This window is divided into GEQ/EFFECT and EXTERNAL HA pages; to switch pages, click the tabs located at the top of the window. GEQ/EFFECT page 1 2 3 4 5 6 M7CL Editor Owner’s Manual 49 AMount AMount BLANK No assignment 31 Band GEQ 31-band 1-in/1-out graphic equalizer Flex15GEQ 2-in/2-out graphic equalizer that allows any fifteen of the 31 bands to be controlled EFFECT Internal effect (only for RACK 5–8) BInput patch Select the input port(s) that will be assigned to the rack, from the following choices. NONE No assignment MIX 1–16 MIX channel 1–16 MATRIX1– 8 MATRIX channel 1–8 ST L, ST R, MONO(C) STEREO channel L/R, MONO channel INS CH 1–48(*) INPUT CH 1–48(*) insert in INS MIX 1–16 MIX channel 1–16 insert in INS MATRIX1–8 MATRIX channel 1–8 insert in INS ST L, INS ST R, INS MONO(C) Insert-in of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed only if 48 is selected in the Input Channels field of the Mixer Setup window when editing offline, or when editing online with the M7CL-48. This is not shown if nothing is mounted in the rack. CModule graphic This area shows a graphic of the GEQ module or effect module that is currently assigned to the rack, and the parameters of that module. You cannot edit the parameters in this screen. Double-click this to open the module editor for that rack unit. By holding down the key of your computer keyboard and double-clicking this, you can open multiple rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window of the M7CL itself. DInput meter/Output meter These indicate the level of the signals being input and output from the rack. EOutput patch Select the output port(s) that will be assigned to the rack, from the following choices. NONE No assignment CH 1–48(*) INPUT CH 1–48(*) STIN1L-STIN4R ST IN channel 1–4 (L/R) INS CH 1–48(*) INPUT CH 1–48(*) insert out INS MIX 1–16 MIX channel 1–16 insert out INS MTRX1–INS MTRX8 MATRIX channel 1–8 insert out INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed only if 48 is selected in the Input Channels field of the Mixer Setup window when editing offline, or when editing online with the M7CL-48. FON, BYPASS This switches the GEQ module or effect module between active and bypassed states. A GEQ module is active when the ON button is lit. An effect module is active when the BYPASS button is dark. M7CL Editor Owner’s Manual 50 Rack module editor — GEQ window . 31 Band GEQ . Flex15GEQ In this window you can select the insertion destination of GEQ, and edit the parameters. 1 2 ARack No. (Rack selection) Select the rack modul...

Эта инструкция также подходит к моделям:
Музыкальные инструменты - M7CL-32 (4.33 mb)
Музыкальные инструменты - M7CL-48ES (4.33 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории