Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
NOTE • Some audio signal delay will occur in FROM DAW mode, since the audio signals pass through the computer. When you’ve finished the sound check, switch to FROM STAGE BOX mode, or press the ASIO STREAMER button to turn it off (unlit). 1 Press the SETUP button to access the SETUP screen. 2 Press the ASIO STREAMER button and the FROM DAW button, making them light. 3 Press the SETUP button to close the SETUP screen. With these settings, the computer will receive the audio signals that are being input to the M7CL-48ES’s ES IN 1–48 and the audio signals that are being output from the M7CL-48ES’s ES OUT 1–16. The M7CL-48ES will receive the audio signals from the computer into ES IN 1–48. FROM DAW Computer (DAW) STAGE BOX IN IN OUT 1–48 49–64 1–48 EtherSound connector FROM STAGE BOX INPUT PATCH [3rd] port FROM DAW ES IN 1–48 ES OUT 1–16 OUTPUT PATCH M7CL-48ES NOTE • If the console is restarted in FROM DAW mode, it will switch to FROM STAGE BOX mode and then start up. Support for remote control of an exter- nal head amp connected to a slot Support for remote control of an exter- nal head amp connected to a slot nected to the M7CL-48ES’s slot 1. By using this in conjunction with the EtherSound port built into the M7CL-48ES, you can remotely control up to twelve AD8HR units or up to six SB168-ES units. NOTE • If controlling via a slot, use AVS-ESMonitor to make EtherSound settings. • If you want to use the console’s EtherSound port as well, set it up as a separate EtherSound network. If you set it up as the same Ether- Sound network, the word clock will not be synchronized, and remote control will not be possible. Connecting an AD8HR via the M7CL-48ES’s slot To remotely control the AD8HR via the M7CL-48ES’s slot, install the MY16-ES64 EtherSound card in the M7CL-48ES’s slot 1, and use an Ethernet cable to connect the MY16-ES64’s EtherSound [OUT] port to the NAI48ES’s EtherSound [IN] port. To send the signals being input to the AD8HR to the M7CL-48ES, use a D-sub 25-pin AES/EBU cable to connect the AD8HR’s DIGITAL OUT A (or B) to the NAI48ES’s AES/EBU port. Signals are sent and received from the NAI48-ES to the M7CL-48ES via EtherSound. It is also possible to “daisy-chain” multiple AD8HR units to remotely control them simultaneously. To do so, connect the AD8HR’s HA REMOTE 2 port to the second AD8HR unit’s HA REMOTE 1 port. If you’re using an NAI48-ES, a maximum of six AD8HR units can be connected. Audio signals Remote signals M7CL-48ES Slot 1 AD8HR 1 AD8HR 2 AD8HR 3 NAI48-ES EtherSound [IN] connector AES/EBU connectors DIGITAL OUT A connector DIGITAL OUT A connector DIGITAL OUT A connector HA REMOTE connector HA REMOTE 1 connector HA REMOTE 2 connector HA REMOTE 1 connector HA REMOTE 2 connector HA REMOTE 1 connector HA REMOTE 2 connector Up to six units MY16ES64 MY16EX MY16EX 4 a the M7CL-48ES’s slot If you want to remotely control an SB168-ES via one of the M7CL-48ES’s slots, install an MY16-ES64 Ether- Sound card into the M7CL-48ES’s slot 1, and use an Ethernet cable to connect it to the SB168-ES. By daisy-chaining or ring-connecting multiple SB168-ES units, and installing two MY16-EX expansion cards in the M7CL-48ES’s slots, you can remotely control up to three SB168-ES units simultaneously. • If you’re also using the console’s EtherSound port, do not simultaneously ring-connect the two EtherSound networks. Word clock synchronization will not be possible if you do so. NOTE • Daisy-chain connections Audio signals M7CL-48ES SB168-ES SB168-ES Remote signals Slot 1 MY16- ES64 MY16- EX MY16- EX OUT IN OUT IN OUT IN SB168-ES • Ring connections Audio signals M7CL-48ES SB168-ES SB168-ES SB168-ES Remote signals Slot 1 MY16- ES64 MY16- EX MY16- EX OUT IN OUT IN OUT IN 5 Remote control of an external head amp connected to a slot Remote control of an external head amp connected to a slot nected via the M7CL-48ES’s slot, an EXTERNAL HA tab has been added to the VIRTUAL RACK window which appears when you press the RACK button. q q COMM PORT This specifies whether the external head amp connected via th...
Эта инструкция также подходит к моделям:Музыкальные инструменты - M7CL-32 (440.97 kb)
Музыкальные инструменты - M7CL-48ES (440.97 kb)