Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации HP, модель MPE/iX 6.0 Operating System

Производитель: HP
Размер: 226.13 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


Hewlett-Packard
SCSI-Fibre Channel Router Installation and User Guide
5.1.4 Serial Port Operation
As is shown in Figures 5-7 and 5-8, a number of serial port diagnostic and maintenance
commands are available for the user in the ‘Serial Port Menu’. The menu options available will be
identical for Hyperterminal as well as for any other communication software utility tool, such as
Procomm Plus. The differences occur in the way that several of the commands proceed past the
point of selecting the menu item. For the benefit of new users however, the whole sequence will
be presented here for Hyperterminal, and then set out again separately later, for Procomm Plus.
5.1.4.1.1 ‘?’: Show Serial Port Service Utility Key Assignments Menu
This command will display a list of functions as shown in Figure 5-7. If using the SCSI-
FC Router in a distance solution, please note that functions that appear on the screen in
Figure 5-7 are utilized with the host router (SCSI-FC Router H). This is also the screen
that will appear if the router is being used as a connectivity device. Figure 5-8 shows the
menu that appears for use by the device router (SCSI-FC Fabric Router).


Serial Port Service Utility Key Assignments:

'1': Show VPD
'2': Show SCSI Map
'R': Force Hardware Reset
'C': Clean Up Configuration Table
'H': Download SCSI-FC Router H Microcode From Local Computer
'D': Download SCSI-FC Router D Microcode From Local Computer
'?': Show Serial Port Service Utility Key Assignments Menu
'q': Quit Serial Port Service Utility:


Figure 5-7. Serial Port Menu (for Host Router in Distance Solution)



User Service Utility Key Assignments:

'?': Show User Service Utility Key Assignments Menu
'1': Show VPD
'2': Show LUN Map
'3': Download SVE Microcode from Local Computer
'4': View/Change Response to SV Management Programs
'5': Clear Error Log
'6': View/Change Interface Configuration
'7': Virtual Drive Utility
'9': Clear SAN database
'R': RASD
'Q': Quit Serial Port Service Utility

Figure 5-8. Serial Port Menu (for Fabric Solution)





Revision 2.1.0
Page 25


...

Эта инструкция также подходит к моделям:
Программное обеспечение - MPE/iX 6.5 Operating System (226.13 kb)
Программное обеспечение - MPE/iX 7.0 Operating System (226.13 kb)
Программное обеспечение - MPE/iX 7.5 Operating System (226.13 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории