Оценок - 4, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
(*) During offline editing when M7CL-32 is selected in the System Setup dialogbox, or during online editing with the M7CL-32 connected, up to sixteen groups can be assigned for INPUT CH 1–32, and you’ll be able to choose from link groups A–R. BCLEAR ALL Clears the link settings for all channels. M7CL V3 Editor Owner’s Manual 69 CLINK PARAMETER CLINK PARAMETER HA Head amp gain and phantom power settings ATT Attenuation value EQ Equalizer settings DYNAMICS1 Dynamics 1 settings DYNAMICS2 Dynamics 2 settings MIX SEND Send amount from input channel to MIX bus MIX ON MIX SEND on/off MATRIX SEND Send amount from input channel to MATRIX bus MATRIX ON MATRIX SEND on/off FADER Fader level value CH ON Input channel module output on/off (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. NOTE The HA and FADER parameters will maintain level differences between linked channels. DSEND PARAMETER Specify the link status for each MIX/MATRIX SEND bus. M7CL V3 Editor Owner’s Manual 70 Scene window Scene window . This window is divided into SCENE MEMORY, RECALL SAFE, and FADE TIME pages. To switch pages, click the tabs shown in the upper part of the window. SCENE MEMORY page Here you can edit the M7CL’s scene memories. You can also load scene library files from a USB storage device or from a drive of your computer, and edit them. In this case, you can re-save all scenes to a file after editing, recall just a desired scene, or copy a desired scene to the scene memory of the M7CL itself. 1 2 3 4 5 6 AFile name Indicates the file name of the currently-open scene library. BOPEN (Open a file) Opens a scene library file located on a drive of your computer. CCLOSE (Close a file) Closes the currently-open scene library file. DSAVE Saves the currently-open scene library file on a drive of your computer. ESAVE AS (Save as a different name) Saves the currently-open scene library file under a different name on a drive of your computer. M7CL V3 Editor Owner’s Manual 71 FFILE This area lists the scenes in the file you opened using the OPEN button (2). The list includes the following items. HINT To view items that are not currently shown, scroll the list to the right. 7 8 9 J LK M N GNo. This is the scene number. HTITLE This is the scene title. You can also double-click this area and edit the title. IPROTECT This indicates whether protect is on or off for each scene. This area displays a lock icon for protected scenes; these scenes cannot be overwritten, nor their title edited. Read-only scenes are indicated by “R” displayed in this column. JCOMMENT This column shows the comment assigned to each scene. You can also double-click this column and edit the comment. KFOCUS From the following list, choose the parameters that will be recalled by a Scene Recall. If you select ALL, the other buttons will be unavailable. Multiple selections are allowed for buttons other than ALL. ALL All the settings of the scene will be recalled RACK GEQ and internal effect settings will be recalled HA Internal head amp and external head amp settings will be recalled IN PATCH Input patch settings will be recalled OUT PATCH Output patch settings will be recalled IN Input channels (INPUT, ST IN, DCA) settings will be recalled except for head amp settings OUT Output channel (MIX, MATRIX, STEREO/MONO) settings will be recalled WITH SEND(*) Send settings to the output channels will be recalled (*) Can be selected only if OUT is selected LTIME STAMP Indicates the time at which the scene was last stored, in the format of month/day/year/hours/minutes/seconds. This column is only for display, and cannot be edited. MFADING This switches fading on/off for each scene. NFADE TIME Indicates the FADE TIME for each scene. You can edit the FADE TIME by double-clicking this field. M7CL V3 Editor Owner’s Manual 72 Q R S OINTERNAL DATA This area shows the M7CL’s scene memory contents. The items displayed are the same as in the FILE list (6). As desired, you can copy single or multiple scenes between the FILE list and the INTERNAL DATA list, and copy or move them to a different location within a list. PSTORE Stores the current settings to the scene that is selected in the list. QRECALL Recalls the settings of the scene selected in the list. RCLEAR Clears the scene(s) selected in the list. (The title of the cleared scene(s) will be reset to [No Data!].) SUNDO Cancels the last-performed scene recall, store, copy, or move operation. TPROTECT Turns on the Protect setting for the scene(s) selected in the list. M7CL V3 Editor Owner’s Manual 73 RECALL SAFE page Here you can make settings for the Recall Safe function that excludes only specific channels from recall operations of all scenes. AINPUT SAFE PARAMETERS In this area you can view and edit the Recall Safe settings for all input channels and ST IN channels. This area contains the followi...
Эта инструкция также подходит к моделям:Музыкальные инструменты - M7CL-32 (2.63 mb)
Музыкальные инструменты - M7CL-48 (2.63 mb)