It can also be viewed during online editing for the M7CL-48 or M7CL48ES. The channel name is shown in the boxes immediately below. DInput meter This indicates the level of the signal that is being input to the currently selected GEQ module. EOutput patch Click the CHANNEL field, and choose one of the following as the signal route that will be patched to the output channel(s) of the currently selected GEQ module. NONE No assignment CH 1–48(*) INPUT CH 1–48(*) STIN1L-STIN4R ST IN channel 1–4 (L/R) INS CH 1–48(*) INPUT CH 1–48(*) insert out INS MIX 1–16 MIX channel 1–16 insert out MATRIX INSERT1–8 MATRIX channel 1–8 insert out INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL48ES. The channel name is shown in the boxes immediately below. FOutput meter This indicates the level of the signal that is being output to the currently selected GEQ module. M7CL V3 Editor Owner’s Manual 58 . . 7 J K 8 9 . Flex15GEQ K 8 7 L J GON (GEQ on/off) Switches the currently selected GEQ module on/off. HLINK This button links the settings of two adjacent odd-numbered/even-numbered 31BandGEQ modules, or the group A and group B settings of a Flex15GEQ. When you click this button, a window will ask you for confirmation. Click the buttons for the modules you want to use as the parameter copy-source and copy-destination. If you click the RESET BOTH button, the parameters of both modules will be reset to the default state. IGEQ graph This graph shows the response of the currently selected GEQ module. JGEQ faders These faders cut/boost the frequency bands of the GEQ module. The value of each fader is shown in the numerical box below it. Hold down the (< >) key and click to set the value to 0.00 dB. KEQ FLAT This button resets all GEQ faders to the 0 dB position. LAVAILABLE BANDS (number of operable bands) (Flex15GEQ only) For a Flex15GEQ, you can operate any fifteen of the thirty-one bands. This numerical display box shows the remaining number of bands that can be operated. If you have operated fifteen bands, this number will be zero, and you won’t be able to operate any additional bands. If you want to operate another band in this state, you’ll need to return a previously-operated band back to the 0 dB position. M7CL V3 Editor Owner’s Manual 59 Rack module editor — Effect window Here you can select the effect type for an internal effect, edit the parameters, and specify the input/output patching. M7CL V3 Editor Owner’s Manual 60 ARack No. (Rack selection) ARack No. (Rack selection) BBYPASS This button temporarily bypasses the effect. CCUE This button cue-monitors the output of the currently selected effect. DEFFECT NAME Indicates the title of the currently selected effect. EEFFECT TYPE Indicates the currently selected effect type. You can also switch the effect type from this window. To do so, click the text box, and select the desired effect type from the popup menu that appears. FLIBRARY This button accesses the effect library. Clicking this button will open the EFFECT page of the LIBRARY window. 4 21 3 65 8 J K 7 9 GInput patch Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to the L/R input channels of the internal effect. NONE No assignment MIX 1–16 MIX channel 1–16 MATRIX1–8 MATRIX channel 1–8 ST L, ST R, MONO(C) STEREO channel L/R, MONO channel INS CH 1–48(*) INPUT CH 1–48(*) insert in INS MIX 1–16 MIX channel 1–16 insert in INS MATRIX1–8 MATRIX channel 1–8 insert in INS ST L, INS ST R, INS MONO(C) Insert-in of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. The channel name is shown in the boxes immediately below. HInput meter Indicates the level of the signal being input to the internal effect. IOutput patch Click the L CHANNEL or R CHANNEL area, and choose one of the following as the signal route that will be patched to the L/R output channels of the internal effect. NONE No assignment CH 1–48 INPUT CH 1–48(*) STIN1L–STIN4R ST IN channel 1–4 (L/R) INS CH 1–48(*) INPUT CH 1–48(*) insert out INS MIX 1–16 MIX channel 1–16 insert out MATRIX INSERT1–8 MATRIX channel 1–8 insert out INS ST L, INS ST R, INS MONO(C) Insert-out of STEREO channel L/R or the MONO channel (*) INPUT CH 33-48 can be viewed during offline editing only if “M7CL-48” or “M7CL-48ES” is selected in the System Setup dialog box. It can also be viewed during online editing for the M7CL-48 or M7CL-48ES. The channel name is shown in the boxes immediately below. M7CL V3 Editor Owner’s Manual 61 JOutput meter JOutput meter KParameter display select button If“046 REV-X Hall,”“0...
)
