Also industrial applications; furniture frames, crates, pallets, and underwater applications. Features: Drives bulk nails, from 5d to 70d Balanced 2.46 lb. weight reduces fatigue Operates from 30 to 125 psig Drives nails into concrete, cinder blocks, and other hard materials Eliminates bent nails Depth-of-drive control for precise nail placement A10 Automatic Hammer A10 Applications: For dowel pins, leg glides, formica self-edging, t-molding, and upholstery tack strips in furniture an

If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. . Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of injury when used on another tool. . Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. Service . Verifique si las partes moviles no estan desali

De volgende schroef wordt automatisch aangebracht wanneer het gereedschap tegen het werkvlak wordt gedrukt. (1) Den Ausloseknopf ziehen, um den Motor zu starten. (2) Das Nasenstuck mit gleich bleibender Kraft gegen die Arbeitsflache drucken. Das Werkzeug erst von der Arbeitsflache nehmen, wenn die Kupplung ausruckt und das Bit zu drehen aufhort, was eine vollstandig eingedrehte Schrauben anzeigt. (1) Druk de trekker in om de motor te starten. (2) Druk de neus met constante kracht tegen het wer

BRINS !T ON.' Features and Benefits: (continued, • Quick Release - Feed system snaps off to give easy bit access. • Adjustable Nose Piece - Easily adjusts tool for screw sizes from 1" - 2" (25 mm - 50 mm). • Super-Tough Drive Bits - Outlasts the competition. • SENCO's Full One-Year Warranty. • Modular design - snaps together with or without flooring extension, quickly and easily (with no tools). • Includes two nosepieces - One for drywall, one for wood Tool Specifications: Model #: DS20

The DS300-S2 comes complete with the DuraSpin collated screw feed system mounted on a screwdriver, a flooring extension, a rugged carrying case and two spare bits. Applications: Ideal for driving screws from 1-5/8"- 3" in length for exterior decking, floor sheathing and other wood-to-wood or wood-to-steel applications. Features and Benefits: • Patented SENCO DuraSpin feed system drives screws quickly and efficiently without jams or misfeeds. • Ergonomic design - May be used with a one-hande

If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. • Las herramientas con aislante doble cuentan con un enchufe polarizado (una clavija es mas ancha que la otra.) Este enchufe se puede insertar en un tomacorriente polarizado de una sola manera. Si el e

The SENCO DuraSpin® DS200-S4 collated screw system comes conveniently assembled to a rugged 4000 rpm SENCO screwdriver, and is capable of driving drywail screws ranging from 1" - 2" in length. The DS200-S4 comes complete with the DuraSpin collated screw feed system, mounted on a SENCO screwdriver, in a rugged carrying case, and with two spare bits. Applications: Ideal for drywail (to wood or steel) applications. Also good for many wood applications. Features and Benefits: • Pain-Free Produc

Engineered for comfort and convenience, the DS200-14v cordless screw driver drives 1" to 2" screws. Tool Specifications: Voltage: 14.4 volts Battery Ampacity: 1700 mAh RPM: 2300 rev/min Weight: 4.9 lbs. (2.2 kg) Height: 10 inches (254 mm) Length: 13.8 inches (350 mm) Width: 2.8 inches (70 mm) Recharge Time: 1 hour Screw Drives/Charge: see chart on reverse side Fastener Capacity: 50 screws (one strip) Torque Delivered: 37 in-lbs Generated Noise: 74 dBA Vibration: less than 2.5m/sec2 Appl

(2.3 kg) Height: 10" (254 mm) Length: 13.8" (350 mm) Width: 2.8" (70 mm) Recharge Time: One hour Fastener Capacity: 50 screws (one strip) Torque Delivered: 29 In-lbs. Applications: Drywall to wood and drywall to steel studs. Features and Benefits: Reverse switch - to back out driven screws Dynamic braking to conserve brush wear 4,000 RPM high-torque motor drives screws FAST! Patented clutch design is long-lasting durability Cordless power with two 14.4-volt slide batteries Drives 900-1

. Nosepiece has settings; . La boca puede configurarse en seis posibles; . Il y a possibles du nez ; . To tighten screw,depress the nosepiece using slight pressure. Tighten the screw, making sure it is snug against the slidebody. . Para apretar el tornillo, presione la pieza de la boca ejerciendo ligera presion. Apriete el tornillo, asegurandose de que calce bien contra el cuerpo deslizable. . Pour serrer la vis, imprimez une legere pression sur le nez. Serrez la vis en vous assurant qu’elle est