1. Insert the plug of battery charger into the receptacle. Battery When the plug of battery charger has been inserted into the receptacle, pilot lamp will Battery blink in red. (At 1-second intervals) installation hole WARNING: Pilot lamp Do not use the electrical cord if damaged. Have it repaired immediately. Fig. 4 Fig. 3 English 2. Insert the battery to the battery charger. Insert the battery into the battery charger as shown in Fig. 4. Make sure it contacts the bottom of the battery charger.

9) The tightening torque of this unit can be adjusted CapTriangle mark according to the cap position, at which the cap is set. mark (1) When using this unit as a screwdriver, line up the one of the numbers “1, 3, 5 ... 22” on the cap, or the black dot, with the triangle mark on the outer body. (2) When using this unit as a drill, line up the cap drill mark “ ” with the triangle mark on the outer body. Fig. 9 English mark CAUTION: . The cap cannot be set between the numbers “1, 3, 5 ... 22” or th

But the tightening torque does not increase above a certain value even if the tool is driven for a long time. (See Fig. 17, 18, 19 and 20) (3) Diameter of bolt The tightening torque differs with the diameter of the bolt as shown in Fig. 17, 18, 19 and 20. Generally a larger diameter bolt requires larger tightening torque. (4) Tightening conditions The tightening torque differs according to the torque ratio, class, and length of bolts even when bolts with the same size threads are used. The tight

• Four-stage pendulum action • FIXTEC - Rapid blade change system • Die cast aluminium base plate • Extra large roller guide for greater accuracy • Also available in a 14.4V cordless version Angle Grinders - Barrel Grip AG8-100 • 100mm angle grinder • 750 watt motor • Patented spindle lock • Convenient safety switch • Quick action disc guard • 4m Quik-lok cable • Also available in 115mm, 125mm (1200W & 1500W) & variable speed 125mm Angle Grinders - Rear Handle AG23-230 • 230mm angle grinder • 23

If the tool jams, the automatic safety clutch instantly slips the gears and reduces torque, preventing kickback and injury. In addition to protecting you, it also protects MARATHON MOTOR Metabo's Marathon motor lasts up to 5 times longer than other powertool motors. Every aspect of its design is geared towards longer life and exceptional performance. It is a high efficiency, MFX 65 2500 Watt Wall Chaser 18Nm of torque for the toughest jobs. • 7 settings to cut slots or chases 3-41mm wide the gea

Please keep this manual available for others before they use the power tool. MODE D’EMPLOI ET INSTRUCTIONS DE SECURITE AVERTISSEMENT Une utilisation incorrecte et dangereuse de cet outil motorise peut entrainer la mort ou de serieuses blessures corporelles! Ce mode d’emploi contient d’importantes informations a propos de la securite de ce produit. Priere de lire et de comprendre ce mode d’emploi avant d’utiliser l’outil motorise. Garder ce mode d’emploi a la disponibilite des autres utilisateurs

It’s safer than using your hand and it frees both hands to operate tool. 11. Don’t overreach. Keep proper footing and balance at all times. 12. Maintain tools with care. Keep tools sharp at all times, and clean for best and safest performance. Follow instructions for lubricating and changing accessories. 13. When the charger is not in use, or when being maintained and inspected, disconnect its power cord from the AC outlet. 14. Remove chuck wrenches and wrenches. Form habit of checking to see th

Battery-powered tool technology has come a long way in the last few years – and Makita Mobile is definitely the future. Now, mobile tools can develop tons of power, run for longer and recharge in less time. There’s also more choice. With the Makita Mobile range of technology and voltage platforms, you can pick the perfect balance of tool power, size and weight to suit your work. 6260DWLE 9.6V 10mm Mobile Driver Drill 8414DWAE 12V 13mm Hammer Driver DrillOption 3. The Combo When you want more pow