2. Start Up ALWAYS use this start up procedure to ensure that the unit is started safely and properly. If water has frozen in the pressure washer, thaw the pressure washer in a warm room before starting. DO NOT pour hot water on or into the pump; internal parts will be damaged. 1. Check engine oil levels. Add oil as necessary. 2. Check fuel level. Add unleaded gasoline (rated 86 octane or higher) as required. DO NOT refuel a hot engine. Refueling a hot engine could cause a fire. Use only fresh,

examine hoses regularly and replace if damaged. do not attempt to mend a damaged hose. uNPACKING Remove the equipment and all parts from the carton The carton should contain the following: • One pressure washer (pump, engine, cart base) • One cart handle assembly • One spray gun and quick connect lance • Five spray tips • One high pressure hose • One pack of nuts, bolts, and manuals If any parts are missing, DO NOt returN the uNIt tO the retAIler. Know the unit’s model number (located on the ser

Never use a narrow high impact stream or a Turbo/rotary nozzle on a surface that is susceptible to damage. Avoid spraying windows with a narrow high impact stream or turbo nozzle. Doing so may break the window. The most sure way to avoid damaging surfaces is to follow these steps: 7 Pressure Washers Operation (Continued) 1. Before triggering the gun, adjust the nozzle or quick connect tip to a wide fan pattern. 2. Place the nozzle approximately 4-5 feet away from the cleaning surface. Then hold

• Change oil if operating under heavy load or high ambient temperature. • Clean or replace paper air cleaner cartridge. Tap gently to remove dirt. • Change oil. • Replace spark plug. • Replace paper air cleaner cartridge. • Change engine oil. Maintenance Schedule Action needed Engine Oil Type Engine Oil Capacity Honda GX160 Honda GX270 Honda GX390 Engine Fuel Capacity Honda GX160 Honda GX270 Honda GX390 SAE 10W-30 (See Honda’s Owner Manual) 20 fl. oz. 37 fl. oz. 37 fl. oz. 3.3 US quarts (3.1 L)

Remember to use the spraying / cleaning techniques mentioned in the following section. Before starting a pressure washer cleaning job, prepare the surface you intend to clean. Clear furniture from the area and make sure that all windows and doors are closed tightly. Also, protect all plants and trees near the cleaning area with a drop cloth. A covering ensures that your plants won’t be sprayed by the detergents. 2. Start Up ALWAYS use this start up procedure to ensure that the unit is started sa

Read all instructions before using the product. 2. To reduce the risk of injury, close supervision is necessary when the product is used near children. 3. Follow all safety codes as well as the Occupational Safety and Health Act (OSHA). 4. Ensure safety devices are operating properly before each use. DO NOT remove or modify any part of the gun or unit. 5. Know how to stop this product and bleed pressure quickly. Be thoroughly familiar with the controls. 6. Stay alert – watch what you are doing.

BUILT TO LAST Gasoline Powered Horizontal Pressure Washers Product Manual PW2220, PW3005, PW3221, PW3228, PW3520 Please record Model No. and Serial No. for use when contacting the manufacturer: Model No. ______________ Purchase date ____________________ Serial No. ______________ Purchase place ____________________ For Information About This Product, call 1-800-330-0712 Contents Page Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safet

3. Use the BLACK 65° quick connect spray tip. 4. Adjust the detergent injection flow by turning the collar of the injector. Turning collar clockwise increases detergent flow. GENERAL CLEANING TIPS 1. Apply the detergent so that it thoroughly covers the cleaning surface. Apply the detergent from bottom to top to prevent the detergent from sliding down and streaking. Wait a couple of minutes for the detergent to break down the dirt and grime. Use a brush to lightly scrub heavily soiled areas. NEVE

Resulting heat buildup will damage the pump. • NEVER store the pressure washer outdoors or where it could freeze. Freezing temperatures can seriously damage the pump. • Release the trigger when changing from high to low pressure modes. Failure to do so could result in damage to the nozzle. Keep hose away from sharp objects. Bursting hoses may cause injury. Examine hoses regularly and replace if damaged. Do not attempt damaged hose. 3 Pressure Washers Pre-Operation UNPACKING Remove the equipment

Follow manufacturer’s label directions for mixing correct concentrations of soap/detergents The soap detergent to water ratio through the pump is approximately 12% (1 to 8) 2 . Insert the filter end of the clear plastic detergent tube into the detergent container 3. Install 65. (Black) Low Pressure Detergent Tip in the quick connect fitting on the end of the lance neVer replace quick connect tip when gun is triggered. Always engage trigger lock on gun before removing or installing quick connect