Оценок - 6, средний балл: 4 ( )

Производитель: Campbell Hausfeld Размер: 14.49 mb Название файла: Язык инструкции:

BUILT TO LAST Gasoline Powered Horizontal Pressure Washers Product Manual PW2220, PW3005, PW3221, PW3228, PW3520 Please record Model No. and Serial No. for use when contacting the manufacturer: Model No. ______________ Purchase date ____________________ Serial No. ______________ Purchase place ____________________ For Information About This Product, call 1-800-330-0712 Contents Page Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety and Warning Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Assembly and Pre-Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5 Startup, Operation, Shutdown, and Storage. . . . . . . . . . . . . . . . . . . . . . . . 6 - 10 Maintenance and Technical Information . . . . . . . . . . . . . . . . . . . . . . . . . . 10 - 11 Troubleshooting Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 13 Service Record and Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Carefully read and understand these instructions before operating your pressure washer. REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. © 2003 Campbell Hausfeld/Scott Fetzer For parts, product & service information IN462600AV 8/03 visit Pressure Washers Frequently Asked Questions How do I start my pressure washer? 1. Make sure you have gas and oil in the engine. 2. Turn the water on, then trigger the gun to make sure the water will flow smoothly out of the nozzle or tip. 3. Put the engine throttle control in the “Fast/Start” position. Set the fuel shut off switch to “ON.” Set the on/off switch to “ON” (if applicable). 4. Set the choke to “ON.” 5. Pull the trigger (to relieve any back pressure in the pump) while pulling the starter cord. 6. If the engine does not start after three tries, repeat Step 5 (See Page 6) or see Troubleshooting Section (Pages 12-13). What type of oil do I use? The pump on the horizontal pressure washer comes filled with the correct amount of oil and should not need filling. See Page 11 for pump oil types and quantities. THE ENGINE DOES NOT COME FILLED WITH OIL. See Page 11 for engine oil types and quantities. Refer to Pages 10 and 11 of this manual and also refer to the included engine owner’s manual for oil changing instructions. Why don’t I have any water pressure? • Is the water hose attached to the pressure washer? • Is the water turned on? • Check for any kinks, leaks, or blockage in the hoses, fittings, or the nozzle. • Is the adjustable nozzle in the low psi position? If so, move it into the high psi position (See Page 8). • Is the inlet filter screen free of debris? Check and remove debris if needed. • Is the quick connect tip in place? (See Page 4.) How do I get high pressure? • For high pressure, move the nozzle into the high psi position (See Page 8). • For units with quick connect tips: use any color tip with the exception of black. Black tip is used for low pressure detergent application. How do I get the soap suction to work? 1. Attach clear plastic tube to brass barb on pump (See Page 4). 2. Insert filter end of clear plastic tube into detergent liquid. 3. Move the nozzle into the low psi position (See Page 8). 4. For quick connect lance, use black detergent tip (see Page 8). Why doesn’t the pressure washer apply detergents with high pressure? The reason you don’t apply detergents with high pressure is that the detergents “bounce” off the cleaning surface as fast as you apply them. Detergent is only effective when you allow it time to work on the surface of whatever you are cleaning. You can only apply detergent at low pressure, wait 1-3 minutes to allow it to work, and rinse the surface with high pressure. What maintenance do I need to perform on my pressure washer? 1. After turning off the pressure washer and the water, depressurize the hose by triggering the gun. 2. Remove the garden hose and high pressure hose from the pump. 3. Pull the start rope slowly five times to purge water from the pump. This will help protect the pump from damage. 4. Do not store your pressure washer in an area where the temperature will drop below 32° F unless pressure washer is properly winterized (see Page 9). What do I do if I’m missing a part? Call Campbell Hausfeld at 1-800-330-0712 and we will promptly replace your missing parts. DO NOT RETURN THE PRESSURE WASHER TO THE RETAILER! Where can I buy accessories for my pressure washer? • If you can’t find accessories at the store where you purchased your pressure washer, call Campbell Hausfeld at 1-800-330-0712 or visit our website at Who do I call if I have questions or problems? Call Campbell Hausfeld at 1-800-330-071...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: