Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
This document contains procedures to install and verify PCIe Ethernet cards on HP Integrity
servers, for all supported operating systems. This document addresses the following topics:
•
“Operating Systems Supported on HP Integrity Systems”
•
“Prerequisites”
•
“Installing the PCIe Card” (page 4)
•
“Configuring a Card Using HP-UX on HP Integrity Systems” (page 4)
•
“Configuring a Card Using OpenVMS on HP Integrity Systems” (page 5)
•
“Configuring a Card Using Windows Server 2003, Windows Server 2008, or Windows Server
2008 R2 on HP Integrity Systems” (page 6)
•
“Configuring a Card Using Linux on HP Integrity Systems” (page 7)
Operating Systems Supported on HP Integrity Systems
For additional information on using this product with HP Integrity systems, see the I/O
documentation at:
http://www.docs.hp.com/en/netcom.html
Available documents include the following:
•
Product Overview, including specifications, regulatory statements, and Declaration of
Conformity
•
Driver Release History and Release Notes
•
Support Matrix, including supported servers, operating systems, and required versions
•
Support Guides and Users Guides, including detailed maintenance and troubleshooting
information
Prerequisites
Review the prerequisites below before performing any installation.
•
Review the card, technology, and driver documentation. See “Operating Systems Supported
on HP Integrity Systems”.
•
Determine the slot in which to install the card; choose the fastest performing slot available.
For detailed information about slots in entry-level Integrity servers, see I/O Slot Matrix -
Entry Level Integrity Servers in the System Administration section at:
http://www.docs.hp.com/en/hw.html
For additional information about slot restrictions for this card, see the support matrix or
product overview for this card at:
http://www.docs.hp.com/en/netcom.html
•
If the operating system, server, and card, support Online Addition and Replacement (OLAR
for HP-UX 11i v1), Online Addition, Replacement, and Deletion (OL* for HP-UX 11i v2 and
11i v3), or hot-plug (Windows Integrity 64-bit), the server might not need to be powered
off.
For HP-UX 11i v1 OLAR, see Chapter 2 of Configuring HP-UX for Peripherals at:
http://docs.hp.com/en/hpux11i.html
For HP-UX 11i v2 and later releases (OL*) see Interface Card OL* Support Guide in the
System Administration section at:
http://www.docs.hp.com/en/netsys.html
For Windows Integrity 64-bit, see the Installation Guide applicable to your server at:
— http://www.hp.com/go/integrity_servers-docs, or
— http://www.hp.com/go/Blades-docs (for HP Integrity Server Blades)
Operating Systems Supported on HP Integrity Systems
3
...Эта инструкция также подходит к моделям:
Компьютеры - HP BL860c Single Processor Server Blade (274.94 kb)
Компьютеры - HP Integrity BL860c Carrier-grade Server Blade (274.94 kb)
Компьютеры - HP Integrity BL860c i2 Server Blade (274.94 kb)
Компьютеры - HP Integrity BL860c Server Blade (274.94 kb)