Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
About This Document
This document describes how to configure an embedded 1068 controller as the system boot
controller on HP BL860c and BL870c servers running Microsoft Windows Server 2008 SP2 or
Windows Server 2008 R2.
Intended Audience
This document is intended for system administrators and HP support personnel responsible for
installing, configuring, and managing HP Integrity servers. This document is not a tutorial.
New and Changed Information in This Edition
This document includes the following changes since its last release:
•
Removed references to Windows Server 2003
•
Added “SP2” (Service Pack 2) to all references of Windows Server 2008
•
Added support for Windows Server 2008 R2
•
Removed the Load OEM Driver section since Windows Server SP2 and R2 both have the 1068
driver inbox.
Document Organization
This document consists of a single chapter describing the configuration process for the 1068
controller.
Typographic Conventions
This document uses the following typographical conventions:
Computer output
Text displayed by the computer.
Ctrl+x
A key sequence. A sequence such as Ctrl+x indicates that you must hold
down the key labeled Ctrl while you press another key or mouse button.
Key
The name of a keyboard key. Return and Enter both refer to the same
key.
User input
Commands and other text that you type.
WARNING
A warning calls attention to important information that if not understood
or followed will result in personal injury or nonrecoverable system
problems.
CAUTION
A caution calls attention to important information that if not understood
or followed will result in data loss, data corruption, or damage to
hardware or software.
IMPORTANT
This alert provides essential information to explain a concept or to
complete a task
NOTE
A note contains additional information to emphasize or supplement
important points of the main text.
Publishing History
The document part number and publication date indicate the document’s current edition. The
publication date will change when a new edition is printed. Minor changes may be made at
reprint without changing the publication date. The document part number will change when
extensive changes are made. Document updates may be issued between editions to correct errors
or document product changes. To ensure that you receive the updated or new editions, you
Intended Audience
5
...Эта инструкция также подходит к моделям:
Компьютеры - HP BL860c Single Processor Server Blade (904.66 kb)
Компьютеры - HP Integrity BL860c Carrier-grade Server Blade (904.66 kb)
Компьютеры - HP Integrity BL860c Server Blade (904.66 kb)
Компьютеры - HP Integrity BL870c Server Blade (904.66 kb)