If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. • Keep the appliance out of reach of children. • Operate the kettle on a dry, level surface only. • The cord length may be reduced by winding it into the cord channel on the bottom of the base. • The base, the kettle and the cord must never be in contact with hot surfaces (e.g. stove burners). • In the event the kettle is switched on when empty, the overheating protection will immediately shu

INTENDED FOR HOUSEHOLD USE ONLY Our products are engineered to meet the highest standards of quality, functionality and design. We hope you enjoy your new Braun appliance. Important • Read all instructions thoroughly before using this product. • Make sure that your voltage corresponds to the voltage printed on the bottom of the kettle. The kettle may only be operated on the base (g) supplied. • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electri

a b c d e f g 2 3 4 5 6 7 cups a b c d e f g 2 3 4 5 6 7 cups 2 3 4 5 6 7 cups 1a 1b 3 liter2 3 4 5 6 7 cups English IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against electric shock, do not immerse cord, plug, base or appliance in water or other liquid. 4. Close supervision is necessary when any appliance is used by o

In this case, allow the kettle 10 minutes to cool down before filling it with water. • Caution: Do not overfill the kettle! Water could boil over and cause scalding. • Do not open the lid while water is boiling. • During operation, the kettle will get hot. Therefore only use the handle to carry it. Always hold the kettle in an upright position, to avoid boiling water come out. • Check the cord regularly for possible damage. • If the appliance shows any defect, stop using it and take it to a Brau

Empty the kettle after boiling each time. After repeatedly boiling water it is normal that some condensation may have formed on the base of the water kettle. If this happens, just wipe dry with a cloth. Setting into operation 1a Fill the kettle through the spout with the lid closed, or 1b press the lid release button (c), open the lid, fill with water and close the lid again (the kettle will not work with the lid open). 2 Place the kettle on the dry base and plug in the base. 3 Press the on/off

The cord length may be reduced by winding it up with the cord storage facility. Keep the appliance out of reach of children. • The base, the kettle or the cord must never get in contact with hot surfaces (e. g. stove plates). • In case the empty kettle is switched on accidentally, the overheating protection will cut it off automatically. In this case, allow the kettle 10 minutes to cool down before filling it with water. • Caution: Do not overfill the kettle! Water could boil over and cause

Fill the kettle with fresh water and boil it. • Empty the kettle and rinse it again with fresh water. • If the kettle still contains scale, repeat this procedure. • To remove any scale from the scale filter, you may soak it in diluted vinegar. Subject to change without notice. This product conforms to the European Directives EMC 2004/108/EC vt and Low Voltage 2006/95/EC. Max. capacity: 1.6 l water £s>oi Mafê Я7|^ЗХЦ ^А|Л1 ЭАЩЧСК еЧВН| C|Xfê!4^?7|B 7|fe0| £И|ЯЩ*°| %щмп нв|7|ш атцц. AfS

Appelez au 01.47.48.70.00 pour connaitre le Centre Service Agree Braun le plus proche de chez vous. Clause speciale pour la France Outre la garantie contractuelle exposee ci-dessus, nos clients beneficient de la garantie legale des vices caches prevue aux articles 1641 et suivants du Code civil. Espanol Gracias por comprar el hervidor de agua Braun Impression. Esperamos que su diseno y su capacidad de hervido mejoren su calidad de vida. Antes de utilizarla por primera vez, lea detenidamente las

Keep the pump working for a few more seconds for optimum vacuum conditions. 5. In order to release the vacuum, simply open the valve lid. Upon opening, the freshness sound will be heard and the vacuum indicator will move up. 6. To remove the vacuum pump from the motor part, press the release buttons (C) and pull off (MR 5500) or turn (MR 4050). Please note: • In the unlikely case that a vacuum is created, but then gets lost within a short period of time, ensure that all parts are clean. • Do not

If you have any questions, please call: US residents 1-800-BRAUN-11 1-800-272-8611 Canadian residents 1-800-387-6657 Gracias por haber comprado un producto Braun. Esperamos que Ud. quede completamente satisfecha con su nueva Braun fresh system. Si Ud. tiene alguna duda, por favor, en Mexico llame al: 01(800) 508-5800 MRV 5500 MRV 4050 A A B B C D E F F 4 1 3 6 9 12 300 Watt 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 8 9 10 11 12 1213 1415161718 19 20 21 2223 24 25 26 12 345678 91