Important Save the carton packaging until your ice machine has been thoroughly inspected and found to be in good condition. If there is damage, the packaging will be needed as proof of damage sustained in transit. Note to Customer This ice machine was carefully packed and thoroughly inspected before leaving our plant. Responsibility for its safe delivery was assumed by the carrier upon acceptance of the shipment. As directed on the side of the packaging carton, claims for loss or damage sustaine

Things to Remember • Allow your ice machine to run for 24-48 hours to accumulate ice in ice machine's bin. • Unit will cycle often between ice production and ice harvest cycles. • Your unit will automatically shut down when the ice bin is full. • Unplug your ice machine before working on unit. • Keep your ice machine clean for proper ice quality, production, and unit life. • Room and water temperatures will greatly affect the output of ice in your unit (see table). Ice will also melt away, espec

If using a drain pump, check the inlet screen, discharge line, and vent line for any build or restrictions. Leaking drain valve. See "CLEANING YOUR ICE MACHINE" section for cleaning the unit. This will also dissolve and flush out foreign material in the drain valve causing it to leak. Room temperature is too warm. Move to an area where temperature is below 90 deg. F. Ice cubes are too big (greater than 3/4 inch Ice slab not releasing. See "CLEANING YOUR ICE MACHINE" section for cleaning the unit