Войти:
Оценок - 2, средний балл: 4 ( )

Инструкция по эксплуатации B.C. Rich, модель Warlock Revenge

Производитель: B.C. Rich
Размер: 428.44 kb
Название файла:
Язык инструкции:en
Фото и характеристики  B.C. Rich  Warlock Revenge
Перейти к скачиванию



Фрагмент инструкции


Do not leave your instrument in a hot car, direct sunlight, near a stove, heater, an attic or other area where the temperatures are high. Cold temperatures can also damage your guitar. If you must take your instrument out in the cold, let it warm back up before taking it out of the case.This will keep the finish from cracking or clouding. It will also keep your fretboard from drying out and cracking. Cleaning Like all fine instruments, your B.C. Rich requires periodic care and maintenance. One of the most important ways to maintain the beauty of your instrument and prolong its string life is regular cleaning. Perspiration can actually contain acids that are corrosive to the strings as well as the metal parts of the guitar. After playing, wipe down your instrument's finish, strings, fretboard, and metal parts (bridge, tuners, etc.) with a soft cloth.The finish should be polished only as needed to avoid polish build-up that will dull the appearance. When you do need to polish, use a soft treated cloth or cotton rag. Also, only use a polish formulated for musical instruments to avoid build up. Follow these simple steps and your instrument should shine for years to come. Bridge Adjustments Bronze Series Guitars The Bronze Series Guitars have a one-piece adjustable bridge. These are adjusted by turning the two screws on each side of the bridge with a flathead screwdriver until the desired height is achieved. Loosening the strings before adjustment will keep the screws from becoming scratched or blemished. Platinum,Acrylic, Exclusive, and Classic Series Guitars The Tune-O-Matic Bridge is adjusted by turning the two finger screws on each side of the bridge until you reach the desired height. Platinum Pro, NJ, and Neck Thru Series Guitars The Licensed Floyd Rose Tremolo plate on the Platinum Pro, Neck Thru and SpeedLoader-NJ models must be kept parallel to the body for proper intonation and tuning.To adjust, open the back cavity of the guitar and adjust the two claw screws.This can be a time consuming task but once the bridge is balanced, it shouldn’t need adjustment unless you decide to change string gauges. If the bridge is tilting towards the neck, tighten the claw screws, return your guitar to pitch, and see if the bridge is parallel. Changing Strings with a Licensed Floyd Rose Changing strings on a guitar equipped with a locking tremolo may seem tedious at first but with a little practice the process will become second nature. Changing one string at a time will keep the proper tension on the neck and tremolo, which, in turn, will make tuning your guitar back to pitch much easier. 4 SETTING THE FINE TUNER RANGE ON THE SPEEDLOADER TREMOLO Like the Original Floyd Rose, there are several situations that will cause the SpeedLoader fine tuners to run out of range. If this happens don't panic, the fine tuner range can be reset. To reset the fine tuner range first engage the tremolo stop and set the bridge position as described in the "Setting up the SpeedL...

Эта инструкция также подходит к моделям:
Музыкальные инструменты - ASM (428.44 kb)
Музыкальные инструменты - Beast NT (428.44 kb)
Музыкальные инструменты - Bich (428.44 kb)
Музыкальные инструменты - Dagger (428.44 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории