Оценок - 2, средний балл: 4 ( )

Производитель: B.C. Rich Размер: 428.44 kb Название файла: Язык инструкции:

After playing, wipe down your instrument's finish, strings, fretboard, and metal parts (bridge, tuners, etc.) with a soft cloth.The finish should be polished only as needed to avoid polish build-up that will dull the appearance. When you do need to polish, use a soft treated cloth or cotton rag. Also, only use a polish formulated for musical instruments to avoid build up. Follow these simple steps and your instrument should shine for years to come. Bridge Adjustments Bronze Series Guitars The Bronze Series Guitars have a one-piece adjustable bridge. These are adjusted by turning the two screws on each side of the bridge with a flathead screwdriver until the desired height is achieved. Loosening the strings before adjustment will keep the screws from becoming scratched or blemished. Platinum,Acrylic, Exclusive, and Classic Series Guitars The Tune-O-Matic Bridge is adjusted by turning the two finger screws on each side of the bridge until you reach the desired height. Platinum Pro, NJ, and Neck Thru Series Guitars The Licensed Floyd Rose Tremolo plate on the Platinum Pro, Neck Thru and SpeedLoader-NJ models must be kept parallel to the body for proper intonation and tuning.To adjust, open the back cavity of the guitar and adjust the two claw screws.This can be a time consuming task but once the bridge is balanced, it shouldn’t need adjustment unless you decide to change string gauges. If the bridge is tilting towards the neck, tighten the claw screws, return your guitar to pitch, and see if the bridge is parallel. Changing Strings with a Licensed Floyd Rose Changing strings on a guitar equipped with a locking tremolo may seem tedious at first but with a little practice the process will become second nature. Changing one string at a time will keep the proper tension on the neck and tremolo, which, in turn, will make tuning your guitar back to pitch much easier. 4 SETTING THE FINE TUNER RANGE ON THE SPEEDLOADER TREMOLO Like the Original Floyd Rose, there are several situations that will cause the SpeedLoader fine tuners to run out of range. If this happens don't panic, the fine tuner range can be reset. To reset the fine tuner range first engage the tremolo stop and set the bridge position as described in the "Setting up the SpeedLoader Tremolo Bridge base plate." With the base plate set properly and the tremolo stop properly engaged, you are ready to set your fine tuner range. If only one or two of the fine tuners are out of range you may want to try adjusting them without engaging the tremolo stop. Step 1: The first thing you do to reset the range of all the fine tuners is to position all the fine tuner screws to the middle of their possible movement. Step 2: One way to do this is to turn the low "low E" string fine tuner screw all the way up, then turn the "D" string fine tuner screw all the way down. Now, position the "A" string fine tuner screw half way between the "E" and the "D" fine tuner screw positions. Step 3: Now, leaving the "A" string f...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: