Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
Step 3: Now that the new string has been properly installed you should seat the new string.To seat the new string press down firmly on the string just in front of the saddle and just in front of the nut. Step 4: Then do a couple of stretching pulls on the string. Step 5: The string is now seated and no more stretching is necessary, just play. In fact if you stretch the string too vigorously you will damage the string. Just play the string in for a bit and re-adjust your tuning with the fine-tuning screw as needed. If the string you're replacing was tuned to your desired pitch, the new string you install should be able to be tuned to that pitch with the fine tuner screw. If the fine tuners do not have enough range to tune the new string to the previous pitch you will need to adjust the range tuner setscrew as described below. See "Setting the fine tuner range on the SpeedLoader Tremolo". 89 ...
Эта инструкция также подходит к моделям:Музыкальные инструменты - ASM (428.44 kb)
Музыкальные инструменты - Beast NT (428.44 kb)
Музыкальные инструменты - Bich (428.44 kb)
Музыкальные инструменты - Dagger (428.44 kb)