Оценок - 3, средний балл: 4 ( )

Производитель: Black & Decker Размер: 781.02 kb Название файла: Язык инструкции:

Un-check this box to silence the “chirps”. . AUTO-BYPASS: If this box is unchecked, the user must manually bypass any open sensors when the system is armed. If arming is attempted with open sensors, the Console will sound five two-tone beeps and will not arm. Arming to the same mode again within five seconds will bypass any open sensors and arm the Console. Check this box and the Console will automatically bypass any open sensors when the system is armed. . BYPASS-RESTORAL: Bypassed sensors are ignored by the Console and cannot cause an alarm. If this box is checked, the Console will automatically restore (remove the bypass from) any bypassed sensor when the sensor closes. After it’s restored, the sensor is ready to cause an alarm the next time it is opened. Un-check this box to not automatically restore sensors that close. . ALLOW QUICK-ARM: If this box is checked, it allows the Console to be armed by holding down a mode key for two seconds. Un-check this box and an access code must be entered before pressing the mode buttons. . HOME AUTOMATION OUTPUT ACTIVE WHILE ARMED: If this box is checked, the Console’s Automation Output will activate when the system is armed. Un-check this box to disable this feature. 4.5 CONSOLE ENTRY/EXIT PURPOSE: To select delay times and other options for the Console’s exit and entry delays. USER RESPONSE: ENTRY/EXIT . ENTRY DELAY: To change the entry delay, enter a delay time from 20 to 255 seconds. . EXIT DELAY: To change the exit delay, enter a delay time from 20 to 255 seconds. . BEEP DURING ENTRY DELAY: With this box checked, beeps will sound during the entry delay. Un-check this box to silence the beeps during the entry delay. . BEEP DURING EXIT DELAY: With this box checked, beeps will sound during the exit delay. Un-check this box to silence the beeps during the exit delay. . HOME-AUTOMATION OUTPUT ACTIVE DURING ENTRY/EXIT: With this box checked, the home-automation output will be active during the entry/exit delay. Un-check this box to disable this feature. 4.6 CONSOLE ALARMS PURPOSE: For setting the way the burglary, emergency and fire sirens work. Also sets the options for the home-automation output during and after alarms. USER RESPONSE: ALARMS . BURGLARY ALARM: Select SILENT to disable the burglary siren or select SIREN FOR SET TIME for a timed siren after activation. With timed siren selected, enter the length of time (from 1 to 30 minutes) for the burglary siren to run. . EMERGENCY ALARM: Select SILENT to disable the emergency siren or select SIREN FOR SET TIME for a timed siren after activation. With timed siren selected, enter the length of time (from 1 to 30 minutes) for the emergency siren to run. . FIRE ALARM: Enter the length of time (from 1 to 30 minutes) for the fire siren to run in the FIRE ALARM SIREN TIME area. . HOME-AUTOMATION OUTPUT DURING SIREN TIME: Select NONE, FLASH, or ACTIVE from the drop-down menu to choose the way the home-automation output functions while the siren is running. . HOME-AUTOMATION OUTPUT FLASHES DURING/AFTER ALARM: With this box checked, the home-automation output will flash during and after an alarm until the Console is disarmed. . NOTE: The home-automation output will activate steady if the above option is set to ACTIVE. CONSOLE HOME-AUTOMATION OUTPUT PURPOSE: For setting the way the home-automation output functions. USER RESPONSE: HOME AUTOMATION-OUTPUT . WHEN TRIGGERED: Select TOGGLES to cause the home-automation output to switch between on & off with each activation. Select ACTIVE FOR SET DURATION for a timed home-automation output and enter the length of time 1-2500 (in seconds) for the output to activate. . WHEN ACTIVE: Select OPEN to have the home-automation minus terminal float when the output is active. Select SHORTED TO COMMON to have the home-automation minus terminal switch to common ground when the output is active. . AUDIBLE BELL WHEN TRIGGERED: With this box checked, the Console will sound a “bing” when the home-automation output is activated. Un-check this box to have the home-automation output activate silently. 4.8 CONSOLE AUDIO PURPOSE: To select how the Voice Board operates. NOTE: The Model VB-2 (for 2-way audio) or VB-3 Voice Board must be installed to use these options. Selects the audio mode for monitoring with the Console’s microphone and communicating through the Console’s speaker to the subscriber. Controls the human voice prompts from the Voice Board. With 2-way Audio enabled, after the Central Station operator acknowledges the communicators report, the Console will stop its siren and switch to the selected audio mode for 90 seconds. USER RESPONSE: AUDIO . Click the arrow to show a list of settings for Two-way Audio and select the desired mode. NONE: Audio Board will not report as an audio account to the Central Station. No audio monitoring will occur. LISTEN-ONLY: The operator will be able to hear sound from the Console but will not be able to talk through the Console’s speaker. Pressing “9” on a tele...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: