Heat-insulated plate 3. Spray nozzle 4. Water tank 5. Spray button 6. Steam button 7. Pilot light 8. Temperature control knob 9. Handle 10. Front cover 11. Back cover 12. Power supply cord IMPORTANT SAFEGUARDS 1. Please read all instructions carefully before using the appliance for the first time. 2. Before connecting the appliance, check if the voltage indicated on the rating label corresponds with the mains voltage in your home. 3. Do not use appliance for anything other than its intended use.

cotton with polyester) you must always select the lowest ironing temperature for the composition of those fibres. SETTING THE TEMPERATURE • Insert the plug into the wall socket and stand the iron upright. • Turn the temperature control knob (8) to the correct temperature. • The correct temperature will be reached when the pilot light has turned off. The pilot light will be on and off from time to time indicating that the selected temperature is being maintained. SPRAYING This function can be use

1 B Steam blast button C Steam setting control D Self-cleaning button E Spray nozzle F Filling hole G Base H Temperature gauge I Iron ready pilot light 23465_IM.indd2 22 23465_IM.indd 5/21/20105/21/2010 10:40:08 AM 10:40:08 AM Safety advice and warnings in the appliance. - Connect the appliance to a base with an earthed - Read these instructions carefully before switching socket rated at 16 amps. the appliance on and keep them for future consul- The appliance’s plug must fit into the mains tatio

-Do not use this appliance if it is damaged in any way. -Unravel the power cable fully. -Always unplug the iron when out of use, even for a short period. -Do not leave the appliance within the reach of children or disabled individuals. -Unplug the iron before filling or emptying the water deposit. -Never submerge the iron in water or put it under running water. -In order to avoid overloading, do not plug in another high voltage appliance on the same supply line. -Any inappropriate use or the non

Description A Spray button A B C D H I F E G Fig. 1 B Steam blast button C Steam setting control D Self-cleaning button E Spray nozzle F Filling hole G Base H Temperature gauge I Iron ready pilot light 23455_IM.indd2 22 23455_IM.indd 5/21/20105/21/2010 9:36:04 AM 9:36:04 AM Safety advice and warnings in the appliance. - Connect the appliance to a base with an earthed - Read these instructions carefully before switching socket rated at 16 amps. the appliance on and keep them for future consul- Th

Its technology, design and operation and the fact that it exceeds the strictest quality standards, ensures it will give you full satisfaction for a very long time. Description A Spray button A B C D H I F E G Fig. 1 B Steam blast button C Steam setting control D Self-cleaning button E Spray nozzle F Filling hole G Base H Temperature gauge I Iron ready pilot light MW_CO23450_TURBOGLIDE_STEAM_IRON_IM.indd2 22 MW_CO23450_TURBOGLIDE_STEAM_IRON_IM.indd 7/14/20097/14/2009 3:38:16 PM 3:38:16 PM Safety

2. Fill the water deposit through the filling hole (Fig. 1). 3. If your tap water is hard, use distilled water only. 4. Do not use chemically decalcified water. 5. The harder the water the more frequently the iron should be cleaned. 6. Throw out any excess water after use, once the iron has been unplugged. Steam Ironing 1. Fill up the iron as described in the section “How to fill the water deposit”. 2. Plug in the iron. 3. Steam ironing is only possible if you select the highest temperature***.

The packing materials used for this appliance are part of a pick-up, sorting and recycling system. If you wish to discard them, please use the public containers provided for each kind of material. Description A Iron on/off switch. B Boiler on/off switch. C Boiler operation LED. D Iron operation LED. E Steam pressure indicator LED. F Water filling cap. G Mains connexion. H Iron steam switch. I Steam switch control (depending on the model). J Iron thermostat control. K Iron thermostat LED. H B E F

Start ironing the fabrics requiring the lowest temperatures (synthetics) first and progress to a higher temperatures as the iron heats up quicker than it cools. If the fabric to be ironed has various fiber materials (e.g. cotton with polyester), use the lower/lowest ironing temperature. X KIND OF TEXTILE Synthetic Synthetic Wool FIBRE MATERIAL Acrylic Modacryl Polypropylene Polyurethane Acetate Triacetate Synthetic Silk Metallized Cupro Polyamide (Nylon) Polyester Modal Viscose (Rayon) Silk Wool

Please read this instruction manual carefully and familiarize yourself with your new steam iron. Before using the first time, please retain this manual for future reference. A C D E F G H I J K B A. Spray Nozzle B. Water filling inlet C. Steam control turning knob D. Burst of steam button E. Spray Button F. Soft touch grip G. Temperature control dial H. Power cord protector I. Water tank J. Ceramic soleplate K. Self-cleaning button MW_WX23600_PROGLIDE_IRON_IM.indd2 22 MW_WX23600_PROGLIDE_IRON_IM