2. Remove the tank and fill it with water, up to the mark indicating “FULL”. While pressing down the release button, remove the tank. Fill with tap water • Regions that have extremely hard water should use a mixture of 50% tap water and 50% distilled water. • Do not use water treated by household soft water systems, as it contains minerals that are harmful to the iron. • Do not fill the iron with water in excess of the mark indicating “FULL”. If too much water has been poured in, steam will be d

Always disconnect from electrical power source. •You must always unplug (disconnect) the unit when you have finished using it and: A) Before any cleaning or maintenance. B) Before filling and emptying the water tank/steam generator. C) When you leave the room, even if only for a few minutes. •Always place the iron on the iron rest (6) when not in use. •Never use the ironing system if the iron or the steam generatorhave been dropped. To avoid risk of electric shock, do not disassemble or attempt

KEEP THIS MANUAL HANDY FOR EASY REFERENCE. PLEASE REVIEW THE PRODUCT WARRANTY AND MAIL THE OWNER REGISTRATION FORM EP8001 STEAM GENERATOR IRON PROFESSIONAL TYPE IRONING SYSTEM FOR HOUSEHOLD USE EURO-PRO Operating LLC 94 MAIN MILL STREET, DOOR 16 PLATTSBURGH, NY 12901 USA EURO-PRO Operating LLC 4400 BOIS FRANC ST. LAURENT, QUEBEC H4S 1A7 CANADA OUR SUCTIO FOR YINSTRS APPLI AD ALL NG THI IMPORTANT SAFEGUARDS When using your Steam Generator Iron, basic safety precautions should always be followed.

DATE OF PURCHASE: …… …… ………… .. … … …… MODEL: … … . ……… …… . . ………… …. NAME AND ADDRESS OF STORE: …… ……… … ………… ……… ………… ……… ………… …. . EP480H2 IMPORTANT SAFETY INSTRUCTIONS reassembly can cause the risk of electric shock when the iron is used. 9. Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended while connected or on an ironing board. 10. Burns can occur from touching hot metal parts, hot water or steam. Use caution when you turn a stea

euro-pro. com.com OWNER’S MANUALModel: IR577P120V., 60 Hz., 1700 Watts Rev. 02/06A 1 POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified elctrician. Do not attempt to defeat this safety feature. SAVE THESE For Household Model IR577P Printed in China 10 IMPORTANT SAFETY INS

4400 Bois Franc Champlain, NY 12919St. Laurent, QC H4S 1A7 Tel.: 800- 798-7398Tel.: 514-842- 8691 Steam Iron Model EP470 LIMITED WARRANTY EURO- PROCorporation warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. The liability of EURO-PROCorporation is limited solely to the repair or replacement of the product at EURO-PRO’s option. This warranty does not cover damage caused by misuse, negligence, use on improper current

• Hold the steam iron horizontally over a sink. • Turn the variable steam control to “Self-Clean ” position. Hot water and steam will be emitted from the soleplate. Swing the steam iron lightly back and forth gently to allow lime and dust particles to come out. • When the water reservoir is empty, shift the variable steam control from “Self- Clean” position to “0”. • Stand the iron upright and insert the plug into the wall socket to let the iron heat up again. • Move the iron over a clean cotton

All marked fabric settings on the LED Display Panel can be used for dry ironing. 1. Plug the cord into a polarized, 120V AC electrical outlet. The power “ON” light will come on, indicating that the iron is receiving power. 2. Press on the electronic temperature control button to select the desired fabric/temperature setting. Turn the variable steam control dial to “0”. (See “Ironing Guide” for a guide to temperature selection.) 3. Place iron on its heel (on a stable, protected surface) while iro

Read all instructions before using your Garment Steamer. 2. Use the system only for its intended use. 3. To protect against a risk of electric shock, do not immerse any part of the system in water or other liquids. 4. Never yank cord to disconnect from outlet; instead, grasp plug and pull to disconnect. 5. Do not allow cord to touch hot surfaces. Let the system cool completely before putting away or opening water tank (removing the safety cap) . Wrap cord loosely around system when storing. 6. A