1. Follow all operating and safety procedures attached to the charger. 2. Use only Bosch battery pack catalog numbers BAT043 12V, BAT045 12V, BAT040 14.4V, BAT025 18V, BAT026 18V, BAT030 24V, and BAT031 24V. 3. Do not wash the Flashlight with water nor keep in a damp location. If the Flashlight gets wet, dry it off as soon as possible. 4. The Flashlight is ruggedly constructed. It should, however, be handled with care. Do not disassemble or forcibly twist head beyond it’s stopping point. C B A D

Power use common sense when operating a tools create sparks which may ignite the dust power tool. Do not use tool while tired or or fumes. under the influence of drugs, alcohol, or Keep by-standers, children, and visitors medication. A moment of inattention while away while operating a power tool. operating power tools may result in serious Distractions can cause you to lose control. personal injury. Electrical Safety Dress properly. Do not wear loose clothing Double Insulated tools are equipped

2). NOTE: You may notice some “wobble” or “run out” of the bit when run in a no load condition. This is due to the quick change SDS tool holder assembly. However, once the bit has a load placed upon it, the bit automatically centers itself to produce an accurate hole. NOTE: The high efficiency available from the rotary hammers can only be obtained if sharp and undamaged accessories are used. The "cost" to maintain sharp and undamaged accessories is more than offset by the "time saved" in operati

A Earthing terminal Grounding terminal Warning symbol Alerts user to warning messages Ni-Cad RBRC seal Designates Ni-Cad battery recycling program This symbol designates This symbol designates that this tool is listed to that this tool is listed by Canadian Standards by Underwriters Laboratories. Underwriters Laboratories. This symbol designates that This symbol designates this tool is listed by that this tool is listed by Underwriters Laboratories, the Canadian Standards and listed to Canadian

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE The term “power tool” in all of the warnings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. Work area safety Keep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liq

protection. Dust mask, non-skid safety Do not abuse the cord. Never use the shoes, hard hat, or hearing protection must cord to carry the tools or pull the plug be used for appropriate conditions. -2 BM 1619929519 12/02 12/10/02 2:52 PM Page 3 Tool Use and Care other condition that may affect the tools Use clamps or other practical way to operation. If damaged, have the tool secure and support the workpiece to a serviced before using. Many accidents are stable platform. Holding the work by hand

SAVE THESE INSTRUCTIONS Work Area from an outlet. Keep cord away from Keep your work area clean and well lit. heat, oil, sharp edges or moving parts. Cluttered benches and dark areas invite Replace damaged cords immediately. accidents. Damaged cords increase the risk of electric shock. Do not operate power tools in explosive atmospheres, such as in the presence of When operating a power tool outside, useflammable liquids, gases, or dust. Power an outdoor extension cord marked "W-A" tools create

Never use the cord secure and support the workpiece to a to carry the tools or pull the plug from an stable platform. Holding the work by hand or outlet. Keep cord away from heat, oil, sharp against your body is unstable and may lead to edges or moving parts. Replace damaged loss of control. cords immediately. Damaged cords increase the risk of electric shock. -2 BM 1619929567 10-03 3/2/04 9:40 AM Page 3 Do not force tool. Use the correct tool for operation. If damaged, have the tool your applic

The term “power tool” inall of the warnings listed below refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool. SAVE THESE INSTRUCTIONS Work area safetyKeep work area clean and well lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power tools create sparks which may ignite the dustor fumes. Keep children and bystanders away whileoperating a power to

If you TRIGGER SWITCH experience bit binding and clutch begins toYour tool is equipped with a variable speedslip, immediately turn the tool "OFF" andtrigger switch. The tool speed can becorrect the condition leading to the bit binding. controlled from the minimum to the maximum AUXILIARY HANDLE nameplate RPM by the pressure you apply to The auxiliary handle will provide additional the trigger. Apply more pressure to increase control, support and guidance for the tool. The the speed and release p