Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
You can download the most recent version of the Help file from the Yamaha website. ¦ Input channel operations • Now the top panel faders can also be used to adjust the send levels from input channels to MATRIX buses (p. 3). • In SENDS ON FADER mode, the send-destination MATRIX bus can now be selected by pressing the [MATRIX] navigation key and then pressing a [SEL] key in the Centralogic section (p. 3). • The various channel parameters can now be saved together in internal memory as channel library data (p. 3). ¦ Output channel operations • The various channel parameters can now be saved together in internal memory as channel library data (p. 3). ¦ Input/output patching • You can now select POST ON (immediately after the fader and [ON] key) as the insert or direct output position (p. 4). • When specifying or clearing a GEQ insertion, insert will now be turned on/off automatically (p. 4). ¦ EQ and Dynamics • The minimum level for an input channel’s GATE threshold level is now -72 dB (p. 4). ¦ Grouping and linking • When you enable channel link, HA gain and fader operations will now be linked while maintaining the level difference between channels (p. 5). ¦ Scene memory • You can now use the Global Paste function to easily modify parameters across multiple scenes (p. 6). • Recall Safe for the attenuator can now be selected independently of EQ (p. 7). ¦ Monitor/Cue • A monitor fader has been added to the monitor output level control, allowing you to use the STEREO MASTER fader / MONO MASTER fader to control the level (p. 5). ¦ User settings • M7CL V2 Editor now allows you to make the same user-defined key settings as on the console itself (p. 7). • Additional functions are now available for assignment to the user-defined keys (p. 7). • Regarding compatibility of data you create (p. 7). Main changes 3 You can now use the top panel faders to adjust the send levels from input channels not only to MIX buses but also to MATRIX buses. In SENDS ON FADER mode, you can now use the MIX/ MTRX ON FADER button to switch between the MIX buses and MATRIX buses as the send destinations. [When MIX ON FADER mode is ON] [When MATRIX ON FADER mode is ON] 1 MIX/MTRX ON FADER select button Each time you press this button, you’ll switch between MIX ON FADER mode and MATRIX ON FADER mode. B MIX/MATRIX bus select button Use these buttons to switch the send destination MIX bus or MATRIX bus. The buttons will be joined if two buses are set to stereo. In SENDS ON FADER mode, the send-destination MATRIX bus can now be selected by pressing the [MATRIX] navigation key and then pressing a [SEL] key in the Centralogic section. Until now, EQ and dynamics were managed as individual libraries, but now the channel parameters (including HA settings) can be managed together in units of channels as channel library data, and stored, recalled, or cleared from internal memory. You can recall 200 different settings each from the input channel library and the output channel library. For both input and output libraries, only 000 (Initial Data) is a readonly preset. The basic operations are the same for input channels and output channels. 1 Use the [SEL] keys to select the channel whose settings you want to manage. 2 Press an encoder of the SELECTED CHANNEL section to access the SELECTED CHANNEL VIEW screen. 3 Press the LIBRARY tool button to access the INPUT CHANNEL LIBRARY window / OUTPUT CHANNEL LIBRARY window. The library window contains the following items. [INPUT CHANNEL LIBRARY] Using the faders to adjust the send levels to the MATRIX buses (MATRIX ON FADER mode) 1 2 1 2 Using the Centralogic section’s [SEL] keys to select a MATRIX bus Input/output channel library support Using the channel library 3 4 5 6 4 [OUTPUT CHANNEL LIBRARY] 1 CURRENT TYPE (OUTPUT CHANNEL LIBRARY only) Displays the type of channel selected by the [SEL] key. B Library type (OUTPUT CHANNEL LIBRARY only) Displays the type of channel for the library item in the list. C Library list Selects the library item that will be the object of the operation. The selected library item will move to the center, and will be highlighted. D STORE button Stores the settings of the currently selected channel into the selected location of the list. When you press this button, the LIBRARY STORE window will appear, allowing you to name the settings. E RECALL button Recalls the settings shown in the list into the currently selected channel. F CLEAR button Clears (deletes) the library item selected in the list. When you press this button, a dialog box will ask you to confirm the Clear operation. 4 By turning any one of the multifunction encoders, move the highlighted line in the list to select the library number you want to store, recall, or clear. 5 Press the STORE button, RECALL button, or CLEAR button. The rest of the steps are the same as for other libraries. You can now select POST ON (immediately after the fader and [ON] key) as the insert or direct output position f...
Эта инструкция также подходит к моделям:Музыкальные инструменты - M7CL-48 (2.02 mb)
Музыкальные инструменты - M7CL-48ES (2.02 mb)