Войти:
Оценок - 5, средний балл: 3.4 ( )

Инструкция по эксплуатации Yamaha, модель M7CL-32

Производитель: Yamaha
Размер: 260.14 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


The user assumes full responsibility for the update. . If you update the firmware V1 or V2 to V3, or V3.0x to V3.5x, all the M7CL internal data will be initialized. Make sure to back up the internal data before updating. The data saved in a previous version can be loaded into a system in a later version. . If you fail to follow these instructions properly, or turn off the M7CL or remove the USB storage device while the update is in progress, the M7CL may be damaged. . If the M7CL does not work properly after updating, and you.ve tried updating several times, please contact your Yamaha dealer. . Yamaha Corporation owns exclusive copyrights for the M7CL firmware, its update program, and this documentation. . AuviTran owns exclusive copyrights for the EtherSound firmware and its update program. . Reproducing or modifying all or part of this documentation without permission is strictly prohibited. . EtherSound is a registered trademark of Digigram S.A. . Windows is a registered trademark of Microsoft ® Corporation in the United States and other countries. . The company names and product names in this document are the trademarks or registered trademarks of their respective companies. Preparing for the update 1.Prepare a USB storage device (USB flash memory) and a computer with a built-in USB connector. 2. Save the M7CL internal data to the USB storage device or M7CL Editor (compatible with the current firmware version) as backup. If you are saving the data to the USB storage device, open the SAVE/LOAD popup window from the SETUP screen. IMPORTANT: If you update the firmware V1 or V2 to V3, or V3.0x to V3.5x, all the internal data will be initialized. Make sure to back up the internal data before updating. 3.Download the latest firmware of the M7CL from the Yamaha Pro Audio website. 4. Connect the USB storage device (formatted in FAT12/FAT16/FAT32) to the USB connector of your computer. For details on the formatting procedure, refer to the manual that came with your computer or USB storage device. If you are formatting the media on the M7CL, refer to the M7CL owner.s manual. Up to 16GB of the USB storage device is checked for operations. If the USB storage device is formatted in M7CL V1.12 or later, 4GB or larger media will be formatted in FAT32, and 2GB or less in FAT16. 5. Copy the four files (extensions .PGM) in the "m7cl_frm***" (*** indicates the version number) folder extracted from the downloaded file to the root directory of the USB storage device. 6. Remove the USB storage device when the files have been copied. For more information on removing the USB storage device, refer to the owner.s manual for your computer and USB storage device. 7. In order to update the M7CL-48ES, download the latest firmware of the EtherSound module from the AuviTran website. Updating the M7CL firmware IMPORTANT: If you intend on downgrading the M7CL-32/48 firmware V3 to V1 or V2, make sure to back up the internal data, then initialize the internal memory before updating. If you perform the update without initializing, operation of the M7CL may halt while a "Starting System" message is flashing on the lower-right of the screen, due to the difference in memory structures. In this case, turn off the power, then turn on the power again while holding down the SCENE MEMORY [STORE] key and [^] key. The internal memory will be forcibly initialized and the M7CL will start up in normal mode in around one minute. Updating the firmware V1 or V2 to V3, or V3.0x to V3.5x ...

Эта инструкция также подходит к моделям:
Музыкальные инструменты - M7CL-48 (260.14 kb)
Музыкальные инструменты - M7CL-48ES (260.14 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории