Оценок - 1, средний балл: 5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The unique header (Model ID) identifies whether the device is a M7CL. To calculate the check sum, add the bytes starting with the byte after BYTE COUNT (LOW) and ending with the byte before CHECK SUM, take the binary complement, and set bit 7 to 0. CHECK SUM = (-sum)&0x7F Bulk Dumps can be received at any time, and can be transmitted at any time when a Bulk Dump Request is received. A Bulk Dump is transmitted on the [Rx CH] channel in response to a Bulk Dump Request. In the data portion, seven words of 8-bit data are converted into eight words of 7-bit data. [Conversion from actual data to bulk data] d[0. 6]: actual data b[0. 7]: bulk data b[0] = 0; for( I=0; I<7; I++){ if( d[I]&0x80){ b[0] |= 1<<(6-I); } b[I+1] = d[I]&0x7F; } [Recovery from bulk data to actual data] d[0. 6]: actual data b[0. 7]: bulk data for( I=0; I<7; I++){ b[0] <<= 1; d[I] = b[I+1]+(0x80&b[0]); } M7CL Manual de instrucciones Formato de datos MIDI Formato de datos MIDI PARAMETER CHANGE Reception This message is echoed if [Parameter change ECHO] is ON. This message is received if [Parameter change RX] is ON and [Rx CH] matches the Device number included in the SUB STATUS. When a parameter change is received, the specified parameter will be controlled. When a parameter request is received, the current value of the specified parameter will be transmitted as a parameter change with its Device Number as the [Rx CH]. Transmission If [Parameter change TX] is ON, and you edit a parameter for which control change transmission has not been enabled, a parameter change will be transmitted with the [Tx CH] as its device number. In response to a parameter request, a parameter change will be transmitted with [Rx CH] as its device number. Command rx/tx function F0 43 1n 3E 11 … F7 rx/tx M7CL native parameter change RARAMETER CHANGE F0 43 3n 3E 11 … F7 rx/tx M7CL native parameter request PARAMETER REQUEST 4PARAMETER CHANGE details 4.1 Current Scene, Setup, Backup, User Setup 4.1.1 Format (Parameter change) Receive Data will be received when [Parameter change Rx] is on and the Device number of both [Rx CH] and SUB STATUS are matched. The data will be echoed when [Parameter change ECHO] is on. The corresponding parameter will be changed immediately the data is received. Transmission Data will be transmitted with the [Device Number] in [Tx CH] when [Parameter change Tx] is on and the parameter is not registered on the [control change assign table]. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture’s ID number (YAMAHA) SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E Digital mixer MODEL ID 00010001 11 M7CL DATA 0ccccccc cc Category DATA 0eeeeeee ee Element no. 0eeeeeee ee Element no. 0iiiiiii ii Index no. 0iiiiiii ii Index no. 0ccccccc cc Channel no. 0ccccccc cc Channel no. 0ddddddd dd data : : EOX 11110111 F7 End of exclusive 4.1.2 Format (Parameter request) Receive Data will be received when [Parameter change Rx] is on and the Device number of both [Rx CH] and SUB STATUS are matched. The data will be echoed when [Parameter change ECHO] is on. The corresponding parameter will be changed via ParameterChange immediately the data is received. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture’s ID number (YAMAHA) SUB STATUS 0001nnnn 3n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E Digital mixer MODEL ID 00010001 11 M7CL DATA Category 0ccccccc cc DATA 0eeeeeee ee Element no. 0eeeeeee ee Element no. 0iiiiiii ii Index no. 0iiiiiii ii Index no. 0ccccccc cc Channel no. 0ccccccc cc Channel no. EOX 11110111 F7 End of exclusive 4.1.3 Data category DATA CATEGORY NAME 0x01 00000001 Current Scene/Setup/Backup/ User Setup Data 4.2 Function call – library store, recall – 4.2.1 Format (Parameter change) Receive Data will be received when [Parameter change Rx] is on and the Device number of both [Rx CH] and SUB STATUS are matched. The data will be echoed when [Parameter change ECHO] is on. The corresponding parameter will be changed immediately the data is received. Transmission Data will be transmitted with the [Device Number] in [Tx CH] when [Parameter change Tx] is on. STATUS 11110000 F0 System exclusive message ID No. 01000011 43 Manufacture’s ID number (YAMAHA) SUB STATUS 0001nnnn 1n n=0-15 (Device number=MIDI Channel) GROUP ID 00111110 3E Digital mixer MODEL ID 00010001 11 M7CL DATA CATEGORY 00000000 00 OTHER DATA FUNCTION NAME 01001100 "L"(ASCII CODE) 01101001 "i"(ASCII CODE) 01100010 "b"(ASCII CODE) 0fffffff ff (ASCII CODE) 0fffffff ff (ASCII CODE) 0fffffff ff (ASCII CODE) 0fffffff ff (ASCII CODE) 0fffffff ff (ASCII CODE) MODULE NAME 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) 0mmmmmmm mm (ASCII CODE) DATA 0mmmmmmm mh number High 0mmmmmmm ml number Low 0ccccccc ch channel High 0ccccccc cl channel Low EOX 11110111 F7 End of exclusive Apendices 257 M7...
Эта инструкция также подходит к моделям:Музыкальные инструменты - M7CL-48 (10.84 mb)
Музыкальные инструменты - M7CL-48ES (10.84 mb)