For serviceability,a mounting similar to the straight up discharge should be used. 6 Installation Wiring to Power Supply WARNING! ELECTRICAL GROUNDING INSTRUCTIONS THIS APPLIANCE IS FITTED WITH AN ELECTRICAL JUNCTION BOX WITH 3 WIRES, ONE OF WHICH (GREEN/YELLOW) SERVES TO GROUND THE APPLIANCE. TO PROTECT YOU AGAINST ELECTRIC SHOCK, THE GREEN AND YELLOW WIRE MUST BE CONNECTED TO THE GROUNDING WIRE IN YOUR HOME ELECTRICAL SYSTEM, AND IT MUST UNDER NO CIRCUMSTANCES BE CUT OR REMOVED. Warnin

Distances over 30” are at the installers discretion; and if ceiling height and flue length permit. Note b - a 10-foot high ceiling requires use of an optional flue extension FXWC50EC, available from your local dealer. - 6 INSTALL FLUE MOUNTING BRACKET (DUCTED AND NON-DUCTED HOODS) 1. Assemble the flue mounting bracket, adjusting outside width as shown. See Figure 7. 2. Carefully center the mounting bracket directly over the range hood location. 3. Secure the bracket assembly to the ceiling using

They will slowly become saturated and gradually less effective. The charcoal filter cannot be cleaned, it should be replaced approximately every three months or more often if the hood is used for more than three hours per day. To Remove/Replace the Charcoal Filter/s 1. Remove the metal inlet grille. 2. Carefully turn the disk (C) anti-clockwise and remove the charcoal filter/s (B) from the motor support/s (A) as illustrated opposite. 6 3. Clean the metal inlet grille/s and motor support/ s befor

For general assistance with your appliance or for further information on Moffat products please contact our Customer Care Department. Customer Care Department, Moffat 55 - 77 High Street Slough Berkshire SL1 1DZ Tel: 08705 950 950* * calls to this number may be recorded for training purposes. 8 GUARANTEE CONDITIONS We, Moffat, undertake that if within twelve months of the date of the purchase this Moffat built-in appliance or any part thereof is proved to be defective by reason only of faulty wo

640793 KLWV10GE2M 640794 EI - Electrical connection Z > o o ö uo o CN CN Z > o o <£ CD cs| Üo CD CN CN OPTIONAL ACCESSORIES ACCESSORIES I MODELS I KLW610GEM KLWV610GEM KLW10GE21M KLWV10GE2M 640791 640792 640793 640794 FLUE CONDENSER F.HOOD-IO GN2/1 GAS OVEN 640415 640415 FLUE CONDENSER F.HOOD-6&IO 1/1 GAS OVENS 640413 640413 ZANUSSI PROFESSIONAL HHA01 2012-07-19 The Company reserves the right to alter technical specifications without prior notice.

ORIES 304 S/S LABYRINTH FILTER H=250 MM 2 2 2 2 640791 LEGEND KLW610GEM 640791 KLWV610GEM 640792 KLW10GE21M 640793 KLWV10GE2M 640794 EI - Electrical connection Z > o o ö uo o CN CN Z > o o <£ CD cs| Üo CD CN CN OPTIONAL ACCESSORIES ACCESSORIES I MODELS I KLW610GEM KLWV610GEM KLW10GE21M KLWV10GE2M 640791 640792 640793 640794 FLUE CONDENSER F.HOOD-IO GN2/1 GAS OVEN 640415 640415 FLUE CONDENSER F.HOOD-6&IO 1/1 GAS OVENS 640413 640413 ZANUSSI PROFESSIONAL HHA01

These hoods are specially conceived for combi steamers. The models detailed on this sheet are 4 hoods for 6 and 10 GN 1/1 and 10 GN 2/1 combi steamers, available in static or ventilated version. HOODS FOR COMBI STEAMERS ZANUSSI PROFESSIONAL FUNCTIONAL AND CONSTRUCTION FEATURES ♦ Built in AISI 304 stainless steel. ♦ Static models:they have to be connected through canalization to a remote extractor. ♦ On model with built-in fan, a built-in humidity sensor automatically activates the venti

The system guarantees the correct aspirated air flow based on different working conditions as well as high energy savings. ♦ All models need a direct and indipendent expulsion of the air to the outside. ♦ Endowed with “Dedalus” labyrinth filter based on the fat centrifugal filtration. The particular deflector elements disposition forces the intake air to change direction several times. The air fattest particles bump against filter elements and deposit on their internal sides. The labyrinth fil