Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
HP StoreEver Enterprise
CAUTION:
Parts can be damaged by
Systems Library (ESL) G3 Tape
electrostatic discharge. Keep parts in their
containers until needed. Make sure that you are
Library
properly grounded when touching static sensitive
components.
Library Management Module
CAUTION:
This is a time-sensitive procedure.
Fan Assembly Replacement
You must remove and replace the LMM fan
assembly in five minutes or less. Taking longer
Instructions
than five minutes to complete the procedure can
damage the library.
Abstract
This document describes how to remove and replace an
Inspect the contents of the kit
existing Library Management Module (LMM) fan assembly
in an ESL G3 Tape Library.
The kit contains one LMM fan assembly.
You will also need the ESD strap that shipped with the
ESL G3.
Prepare the library
1.
Open the service door to the module that contains
the LMM fan assembly to be replaced.
2.
Attach the ESD strap to your wrist and to an
unpainted surface inside the door.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
Printed in the US
HP Part Number: QN998-96092
Published: May 2013
Edition: 2nd
*QN998-96092*
Page 1
...Эта инструкция также подходит к моделям:
Устройства обработки данных - HP StoreEver ESL G3 300 slot Tape Library (203.35 kb)
Устройства обработки данных - HP StoreEver ESL G3 700 slot Tape Library (203.35 kb)
Устройства обработки данных - HP StoreEver ESL G3 1500 slot Tape Library (203.35 kb)
Устройства обработки данных - HP StoreEver ESL G3 3000 slot Tape Library (203.35 kb)