Child Lock Child Lock can be used to prevent your children from changing options on control panel while the dryer is running. When Child Lock is enabled, all the buttons will be locked and Child Lock glows. To enable Child Lock, Press and hold OPTION for 3 seconds, A single beep tone is heard and Child Lock is displayed on the status window. To disable Child Lock, press and hold OPTION for 3 seconds again. i!L WARNING! • For better drying performance and safety, clean lint filter every si

Failure to do so can result in fire or electrical shock. Prepare minimum 5 ft (1.52 m) of length in order for dryer to be replaced. First, strip 3 ‘/2 inches (8.9 cm) of outer sheath from end and strip 1 inch of insulation from each conductor. Then, put the hooked shape end of the wire under the screw of the terminal block (hooked end facing rightward) and pinch the hook together and tighten the screw securely. gr ^ 1. Connect neutral wire (white) of power cord to center terminal block scre

You might see a sudden increase or decrease in operation time if the sensor determines more or less drying is required. This is not a malfunction. Time Dry Use TIME DRY to select heat level and drying time manually. This can be used if clothes are not as dry as you like them at the end of the cycle. Use TIME DRY for heavy and bulky items and thick work. TABLE OF CONTENTS PART 1. SPECIFICATIONS ...................................................................................................

Those required minimum clearances are set forth in the picture below. Please keep the following instructions in mind when installing in a closet or recessed area: • Consider allowing additional clearance for installation and servicing. • Wall, door and floor molding may necessitate additional clearances. • An additional inch of clearance is recommended to minimize noise transfer. • Consider space needed for companion appliances. • For closet installations, the picture below shows the minimu